EFTA00374843.pdf

From: "Robert" 4=Ile To: "Lesley Groff" <MIMIII > Subject: FW: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched Date: Wed, 05 Feb 2014 13:48:29 +0000 Attachments: creditcardauth.xls; photo_ljpg; photo_2.jpg; photo_3jpg The pergola is ready Original Message From: Hayes, Will (mailto: Sent: Wednesday, February 05, 2014 8:40 AM To: Robert Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched Good Morning Robert, Attached are photos of your pergola being palletized. We will need the remaining balance of $6,481 prior to us shipping the pergola. If you could fill out the attached credit card authorization form I will get your pergola on the road. Please let me know if you have any questions. Thank you, William Hayes Technical Sales Manager Turnkey Millwork, Inc. 6231 Westgate Road Suite 150 Raleigh, NC 27617 Phone: Fax Direct Line: Original Message From: Hayes, Will Sent: Friday, January 31, 2014 1:12 PM To: 'Robert' Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched Robert, Attached are some documents detailing the installation or your pergola. The first document is about installing our pergola column mounting kits for the (4) outer columns that will receive these kits, the second document is showing how to install our rafter-to-beam attachment plates, and the third document explains how to install the rafters over the threaded rod sticking out of the beams. The threaded rod is used as a support rod to keep the rafters from wanting to lay down due to their shape. Please look these over over the weekend and let me know if you have any questions. Thanks, William Hayes Technical Sales Manager Turnkey Millwork, Inc. 6231 Westgate Road Suite 150 Raleigh, NC 27617 EFTA00374843 Phone: Fax Direct Line: Original Message From: Hayes, Will Sent: Thursday, January 30, 2014 1:44 PM To: 'Robert' Cc: Hayes, Will Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched Robert, I just wanted to email you an update. The weather here has put us a couple of days behind. Your pergola has been machined but needs to be assembled. Assembly will be here tomorrow to start working on your pergola, so by early next week we should have your pergola complete. I will email you Tuesday to let you know where we stand. Thanks, William Hayes Technical Sales Manager Turnkey Millwork, Inc. 6231 Westgate Road Suite 150 Raleigh, NC 27617 Phone: Fax Direct Line: Original Message From: Hayes, Will Sent: Friday, January 17, 2014 11:29 AM To: 'Robert' Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched Robert, What is the ship-to address? Thanks, William Hayes Technical Sales Manager Turnkey Millwork, Inc. 6231 Westgate Road Suite 150 Raleigh, NC 27617 Phone: Fax Direct Line: Original Message From: Robert [mailto: Sent: Friday, January 17, 2014 6:27 AM To: Hayes, Will Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched Thanks. Original Message From: Hayes, Will [mailto: EFTA00374844 Sent: Thursday, January 16, 2014 4:13 PM To: Robert Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched I am pushing to ship the pergola by the end of January, 1/31. I will let you know how we are doing late next week. Thanks, William Hayes Technical Sales Manager Turnkey Millwork, Inc. 6231 Westgate Road Suite 150 Raleigh, NC 27617 Phone: Fax Direct Line: Original Message From: Robert [mailto: Sent: Thursday, January 16, 2014 4:10 PM To: Hayes, Will Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched Ok got. Whets the ETA? Original Message From: Hayes, Will [mailto: Sent: Wednesday, January 15, 2014 10:51 AM To: Robert Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched Robert, Attached is your receipt for the 50% down payment. Thank you, William Hayes Technical Sales Manager Turnkey Millwork, Inc. 6231 Westgate Road Suite 150 Raleigh, NC 27617 Phone: Fax Direct Line: Original Message From: Robert [mailto: Sent: Wednesday, January 15, 2014 9:02 AM To: Hayes, Will Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched Here it is sorry Original Message From: Hayes, Will [mailto: Sent: Wednesday, January 15, 2014 8:33 AM To: Robert Cc: Hayes, Will Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched EFTA00374845 Robert, Attached is your revised quote, paint technical bulletin, and credit card authorization form. Please let me know if you have any questions. Thanks, William Hayes Technical Sales Manager Turnkey Millwork, Inc. 6231 Westgate Road Suite 150 Raleigh, NC 27617 Phone: Fax Direct Line: Original Message From: Robert [mailto: Sent: Sunday, December 15, 2013 2:26 PM To: Hayes, Will Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 - Arched I have found what I want. Can you do the attached? Thanks Robert Caffrey Berkeley Construction LLC. Original Message From: Hayes, Will (mailto: Sent: Friday, December 06, 2013 2:53 PM To: Robert Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 Robert, Do you want both the beams and rafter to be 2x10s, or do you want 2x10 beams and 2x8 rafters? Thanks, William Hayes Technical Sales Manager Turnkey Millwork, Inc. 6231 Westgate Road Suite 150 Raleigh, NC 27617 Phone: Fax Direct Line: Original Message From: Robert [mailto: Sent: Friday, December 06, 2013 1:59 PM To: Hayes, Will Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 William, Thanks for the quote. I was thinking that 10 inch columns would look more subsatantial and I think 2x10 rafters would also be better. What would the price of that kit be? EFTA00374846 Original Message From: Hayes, Will [mailto: Sent: Friday, December 06, 2013 9:56 AM To: Cc: Hayes, Will; Walser, Mike Subject: RE: Turnkey Millwork RFQ Submission - WH-120513-04 Good Morning Robert, Thank you again for your interest in our cellular PVC pergola systems. Working with your 16x16 concrete patio, I would recommend a 14x14 column footprint pergola leaving you around 5"-6" of clearance from the edge of the patio to the edge of the column's base. Attached is a generic drawing of our 14x14 freestanding pergola. Your requested pergola will have 8"x8' square fiberglass columns instead of the pictured 10"x8' round fiberglass columns. Your delivered price for a 14x14 $8,710.75. This price includes: pergola column mounting kits, 4 necessary hardware. Our payment prior to shipping. We will send before asking for final payment. card. freestanding cellular PVC pergola is 4 - 8"x8' square fiberglass columns, 4 - - 18' beams, 13 - 18' rafters, and all terms are 50% down and the balance due digital photos of your completed pergola Payment can be made with check or credit Please feel free to contact me if you have any questions. Thanks, William Hayes Technical Sales Manager Turnkey Millwork, Inc. 6231 Westgate Road Suite 150 Raleigh, NC 27617 Phone: Fax Direct Line: Original Message From: Turnkey Millwork RFQ Submission [manta: Sent: Thursday, December 05, To: TKM Leads; Bobo, Tim; Subject: Turnkey Millwork RFQ Submission - WH-120513-04 2013 10:02 AM Turnkey Millwork Pergola RFQ Submission • Filled out by Robert Phone: Email: Which best describes you? Builder Where did you hear about Turnkey Millwork? Special Instructions: The size of the patio is 16 x 16 what size would you recommend EFTA00374847 PERGOLA QUOTE INFORMATION Pergola Type: standard Pergola Material: cellular pvc Free-Standing or Attached: free-standing STANDARD PERGOLA DETAILS Flat or Arched Top: flat Square or Round Columns: square Include Canopy: no canopy Pergola Dimensions Determined by: beam and rafter dimensions Pergola Length: 16\' Pergola Width: 16\' HB&G Building Products accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Neither the sender nor HB&G Building Products (or any of its related companies) accept liability for any damage resulting from the use and/or acceptance of the content of this e-mail message. EFTA00374848