EFTA00652057.pdf

From: Richard Kahn To: "Jeffrey E." <jeevacation@grnail.com> Subject: Re: Dock Fenders Date: Wed, 24 Jun 2015 20:17:56 +0000 ok thank you regarding hole placement in fenders would you like every 1.5 feet or every foot please advise thank you Richard Kahn HBRK Associates Inc. 575 Lexington Avenue 4th Floor New York, NY 10022 On Jun 24, 2015, at 2:17 PM, jeffrey E. <jeevacation@gmail.com> wrote: option 3 On Wed, Jun 24, 2015 at 1:38 PM, Richard Kahn Richard Kahn HBRK Associates Inc. 575 Lexington Avenue 4th Floor New York, NY 10022 Begin forwarded message: From: Richard Kahn Subject: Dock Fenders Date: June 23, 2015 at 3:44:00 PM EDT To: "jeffrey E." <jeevacation@gmail.com> Layout wrote: Attached are 5 layout options for dock fenders in addition to our current layout EFTA00652057 Options 1-3 are three rows of 6' fenders Carlos measured to cover entire dock we would need 693 feet which comes to 116 (6' pieces) Options 4 & 5 are two rows of 6' fenders Carlos measured to cover entire dock we would need 462 feet which comes to 77 (6' pieces) Note 500 feet is minimum order therefore we will need to order 84 pieces Carlos has sample on LSJ in dark grey color which you said was correct color If you are not satisfied with any of the above layouts please advise on alternate configuration Fender Holes Regarding Holes in Fenders i also outlined two options Option A - Screws will be 1.5 feet apart Option B - Screws will be 1 foot apart The Back Hole would be 1/2" and Front Hole will be 1.5" Timing Production will take 3 weeks and then another 1 week for shipping Projected arrival on STT is July 20 Installation Carlos said that with Ramon and Hernando installation will take approximately I week Projected Costs Options 1-3 (three rows of fenders) Color - Dark Grey # 11181 Vendor Hole Drilling (1 drilling cost per hole x 116 pieces x 3 holes) Stainless Steel Threaded Rods & Bolts (estimated 116 pieces x 3 screws Tropical Shipping Miscellaneous Tools (drill bits, etc) 661.08 Total Cost with three rows of fenders per piece x 12.00) 13.44 x 693 feet = 9,314.92 348.00 4,176.00 1,500.00 16,000.00 Options 4 & 5 (two rows of fenders) Color - Dark Grey # 11181 13.44 x 500 feet = 6,720.00 Vendor Hole Drilling (1 drilling cost per hole x 84 pieces x 3 holes) 252.00 Stainless Steel Threaded Rods & Bolts (estimated 84 pieces x 3 screws per piece x 12.00)3,024.00 Tropical Shipping 1,500.00 Miscellaneous Tools (drill bits, etc) 504.00 Total Cost with three rows of fenders 12,000.00 EFTA00652058 Please advise on which Option you would like in addition to number of holes per piece (3 or 4) http:/Avww.zoro.com/value-brand-threaded-rod-plain- I 2-10x3-11-1c01201003p1dar/i/G 1605527/? utm_source=google shopping&utm medium=cpc&utm_campaign=Google_Shopping Feed&gclid=Cjw KEAjwh6SsBRCYrKHF7J3NjicSJACUxAh7poTcc2K3zsySvFqwmGLzK3TUQ52UwvFjuxeOQ- Lh5hoCFICnw wcB&gclsrc=aw.ds http://technorubberindustries.com/techno.pdf Richard Kahn HBRK Associates Inc. 575 Lexington Avenue 4th Floor New York, NY 10022 please note The information contained in this communication is confidential, may be attorney-client privileged, may constitute inside information, and is intended only for the use of the addressee. It is the property of JEE Unauthorized use, disclosure or copying of this communication or any part thereof is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by return e-mail or by e-mail to jea®gmail.com, and destroy this communication and all copies thereof, including all attachments. copyright -all rights reserved EFTA00652059