EFTA02312262.pdf

From: Robert Ilas < Sent: Tuesday, July 24, 2012 5:39 PM To: Subject: RE: revised flooring proposal Hi M, Have you reached a decision about your order? Please let me know if there is anything else I can assist you with. Best, Robert From: [maiIto Sent: Tuesday, July 17, 2012 18:45 To: Robert Ilas Subject: Re: revised flooring proposal Hi Robert. Confirming if I ordered the floors this week, is it truly an 8.10 week lead time? On Jul 16, 2012, at 4:15 PM, Robert Ilas < Hi M , <mailto > wrote: Ebony and co usually sources boards around 16" to 18" wide, then cuts them down to clean the edges. Most clean boards end up 6 to 9 inches wide, then very select ones go over 10 inches wide. To make them 5" wide, they have to cut them again, then do the tong and groove — this brings up the price around 20%. Your order would be around $1400 more for all same 5" wide. The continental oak is always cheaper because the wood is simply cleaner — no matter the tree location, oak in Europe does not have so many imperfections / knots. The finish is the same, limed satin poly, the wood is simply easier to source and cut. EFTA_R1_01200321 EFTA02312262 Please see attached the revised proposal without the kitchen — are you worried about wood in the kitchen or you want another material? Best, Robert C. Ilas VP, Sales North America ebonyandco 156 Fifth Avenue, Suite 707 New York, NY 10010, USA e. <mailto w. www.ebonyandco.com <http://www.ebonyandco.com/> <signature-l.png> <signature-l.png> <Ebonyandco SK 002 dtd July16 Sheetl.pdf> 2 EFTA_R1_01200322 EFTA02312263