EFTA02338769.pdf

From: Eileen McDowell Sent: Friday, August 11, 2017 3:41 PM To: jeffrey E. Cc: Eric Roth Subject: Re: Plan D (IC - divan fabric direction and door detail Hi Jeffrey, Just following up in regards to the divan fabric direction and the divan doors per my email from yesterday (below) Best, Eileen EILEEN MCDOWELL I INTERIOR DESIGN INTERNATIONAL JET INTERIORS I www.intljet.com <http://www.intljet.com/> On Aug 10, 2017, at 2:06 PM, Eileen McDowell < > wrote: Hi Jeffrey, The divan fabric as you may well know has a slight linear direction to it and the lines run the 51" width of the bolt, not into the roll. Pic attached With that being said, due to the 80" length of the 1pc back and bottom cushion, the fabric lines will need to run up and down the cushion and coincide with the carpet lines. If you would like the fabric lines to run FWD to AFT (front to back) than we will need to add a seam on the cushion. Please confirm. Additionally, I reviewed the divan doors again and if we did a welting in the shape of a rectangle the corners will never be sharp. What if we did the welting straight across the doors, just below the latches? Just one bead. I attached the door (36"x11") with some taped up lines for a better visual. We look forward to your feedback. [cid:image011.jpg@0lD311ELE549D0101 EFTA_R1_01301345 EFTA02338769 [cid:image007.jpg@OlD311E0.828C36D0] [cid:image008.jpg@OlD311E0.828C36D0] [cid:image009.jpg@OlD311E0.828C36D0] [cid:image010.jpg@OlD311E0.828C36D0) EILEEN MCDOWELL I INTERIOR DESIGN - ' - < ://www.intljet.com/> I emcdowell@intljet.com <mailto:emcdowell@intljet.com> <mailto:emcdowell@intljet.com> I www.intljet.com <http://www.intljet.com> <http://www.indjet.com/> [FB Logo-big] <http://www.facebook.com/intljet> [Twitter Logo - big] <http://www.twitter.com/intljet> 2221 Smithtown Avenue, Long Island MacArthur Airport, Ronkonkoma, New York 11779 <i mage007.jpg> <image008.jpg> <image009.jpg> <image010.jpg> <i mage01 1.jpg> <image012.jpg> <i mage013.jpg> <image015.jpg> 2 EFTA_R1_01301346 EFTA02338770