EFTA00281248.pdf

nrn (Fs) }AL-22 CON1M7 For Public Use and Display LEED 2009 for Commercial Intern.. USGBC Member Approved November 2008 A EFTA00281248 FIUME YEON UORE© The built environment has a profound impact on our natural environment, economy, health, and productivity. Breakthroughs in building science, technology, and operations are now available to designers, builders, operators, and owners who want to build green and maximize both economic and environmental performance. Through the L EED'' green building certification program, the U.S. Green Building Council (USGBC) is transforming the built environment. The green building movement offers an unprecedented opportunity to respond to the most important challenges of our time, including global climate change, dependence on non sustainable and expensive sources of energy, and threats to human health. The work of innovative building professionals is a fundamental driving force in the green building moment. Such leadership is a critical component to achieving USGBC's mission of a sustainable built environment for all within a generation. USGBC MEMBERSHIP USGBC's greatest strength is the diversity of our membership. USGBC is a balanced, consensus based nonprofit with more than t8,000 member companies and organizations representing the entire building industry. Since its inception in 1993, USGBC has played a vital role in providing a leadership forum and a unique, integrating force for the building industry. USGBC's programs have three distinguishing characteristics: Committee-based The heart of this effective coalition is our committee structure, in which volunteer members design strategies that are implemented by staff and expert consultants. Our committees provide a forum for members to resolve differences, build alliances, and forge cooperative solutions for influencing change in all sectors of the building industry. Member-driven Membership is open and balanced and provides a comprehensive platform for carrying out important programs and activities. We target the issues identified by our members as the highest priority. We conduct an annual review of achievements that allows us to set policy, revise strategies, and devise work plans based on members' needs. Consensus-focused We work together to promote green buildings, and in doing so, we help foster greater economic vitality and environmental health at lower costs. We work to bridge ideological gaps between industry segments and develop balanced policies that benefit the entire industry. Contact the U.S. Green Building Council 2101 L Street, NW Suite 500 Washington, DC 20037 (800) 795-1747 Office (2O2) 82.8-5110 Fax www.usgbc.org LEED 2009 FOR COMMERCIAL INTERIORS EFTA00281250 COPYRIGHT Copyright 2009 by the U.S. Green Building Council, Inc. MI rights reserved. The U.S. Green Building Council, Inc. (USGBC°) devoted significant time and resources to create this LEED° Rating System. USGBC authorizes individual use of the LEED Rating System. In exchange for this authorization, the user agrees: s. to retain all copyright and other proprietary notices contained in the LEED Rating System, a. not to sell or modify the LEED Rating System, and 3. not to reproduce, display, or distribute the LEED Rating System in any way for any public or commercial purpose. Unauthorized use of the LEED Rating System violates copyright, trademark, and other laws and is prohibited. DISCLAIMER None of the parties involved in the funding or creation of the LEED Rating System, including the USGBC, its members, its members, volunteers, or contractors, assume any liability or responsibility to the user or any third parties for the accuracy, completeness, or use of or reliance on any information contained in the LEED Rating System, or for any injuries, losses, or damages (including, without limitation, equitable relief) arising from such use or reliance. Mthough the information contained in the LEED Rating System is believed to be reliable and accurate, all materials set forth within are provided without warranties of any kind, either express or implied, including but not limited to warranties of the accuracy or completeness of information or the suitability of the information for any particular purpose. As a condition of use, the user covenants not to sue and agrees to waive and release the U.S. Green Building Council, its members, volunteers, and contractors from any and all claims, demands, and causes of action for any injuries, losses, or damages (including, without limitation, equitable relief) that the user may now or hereafter have a right to assert against such parties as a result of the use of, or reliance on, the LEED Rating System. U.S. Green Building Council 2101 L Street, NW Suite Soo Washington, DC zany TRADEMARKS USGBC°, U.S. Green Building Council and LEED° are registered trademarks of the U.S. Green Building Council. LEED 2009 FOR COMMERCIAL INTERIORS EFTA00281251 ACKNOWLEDGMENTS The LEED 2009 Rating System has been made possible only through the efforts of many dedicated volunteers, staff members, and others in the USGBC community. The Rating System improvement work was managed and implemented by USG BC staff and included review and input by many Technical Advisory Group (TAG) members with oversight by the LEED Steering Committee. We extend our deepest gratitude to all of our LEED committee members who participated in the development of this guide, for their tireless volunteer efforts and constant support of USGBC's mission: LEED Steering Committee Scot Horst, Chair, LSC Joel Ann Todd, Vice-Chair, LSC Muscoe Martin Stuart Carron Holley Henderson Christine Magar Kristin Shewfelt Jessica Millman Bryna Dunn Neal Billetdeaux Greg Kats Mark Webster Bob Thompson Malcolm Lewis John Boecker Sara O'Mara Alex Zimmerman Ian Theaker Sustainable Sites TAG Bryna Dunn, Chair Stewart Comstock, Vice-Chair Michele Adams Gina Baker Ted Bardacke Stephen Benz Mark Brumbaugh Laura Case Zach Christeson Jay Enck Ron Hand Richard Heinisch Michael Lane Marita Roos Zolna Russell Alfred Vick Horst, Inc Joel Ann Todd M2 Architecture JohnsonDiversey, Inc. H2 Ecodesign, LLC Greenform Architectural Energy Corporation Agora DC Moseley Architects JJR Managing Good Energies Simpson Gumpertz & Heger EPA Indoor Environment Management Branch Constructive Technologies Group, Inc. 7Group Choate Construction Company Rep Canada Green Building Council Rep Canada Green Building Council Moseley Architects Maryland Department of the Environment Cahill Associates Burt Hill Global Green USA Sasaki Brumbaugh &Associates Emory University Campus Services the HOK Planning Group Commissioning & Green Building Services EJFECT. Sustainable Design Solutions Acuity Lighting Group Lighting Design Lab HNTB Hord Coplan Macht, Inc. Ecos Environmental Design, Inc. LEED 2009 FOR COMMERCIAL INTERIORS EFTA00281252 Water Efficiency TAG Neal Billetdeaux, Chair John Koeller,Vice-Chair David Carlson Bill Hoffman Geoff Nara Stephanie Tanner Daniel Yeh David Bracciano Robert Rubin Winston Huff Robert Benazzi Gunnar Baldwin Heather Kinkade Shabbir Rawalpindiwala Bill Wall Energy & Atmosphere TAG Greg Kats, Chair Marcus Sheffer, Vice-Chair Drury Crawley Jay Enck Ellen Franconi Mark Frankel Nathan Gauthier Rusty Hodapp John Hogan Bion Howard Dan Katzenberger Bob Maddox Brenda Morawa Erik Ring Michael Rosenberg Mick Schwedler Gord Shymko Gail Stranske Michael Zimmer Materials & Resources TAG Mark Webster, Chair Steven Baer, Vice Chair Paul Bertram Chris Dixon Ann Edminster Lee Gros Theresa Hogerheide-Reusch Nadav Malin Nancy Malone JJR Alliance for Water Efficiency Columbia University H.W. Hoffman and Associates, LLC Civil & Environmental Consultants U.S. Environmental Protection Agency University of South Florida 'Pampa Bay Water NCSU-BAE and McKim & Creed SSR Engineers Jaros Baum & Bolles TOTO USA, INC Forgotten Rain, LLC Kohler Company Clivus New England, Inc. GoodEnergies 7group US Department of Energy Commissioning & Green Building Solutions, Inc. IPMVP and AEC New Buildings Institute Harvard Green Campus Initiative Dallas/Fort Worth, Energy & Transportation Management City of Seattle Department of Planning & Development Building Environmental Science and Technology Engineering, Energy, and the Environment Sterling Planet BVM Engineering, Inc. LPA, Inc. Oregon Department of Energy Trane I PMVP and G.P. Shymko & Associates CTG Energetics Thompson Hine LLP Simpson Gumpertz & Heger Five Winds International NAIMA NEW Design AVEnues Lee Gros Architect and Artisan, Inc Reusch Design Services BuildingGreen, LLC. Siegel & Strain Architects LEED 2009 FOR COMMERCIAL INTERIORS Iv EFTA00281253 Kirsten Ritchie Wayne Trusty Denise Van Valkenburg Gabe Wing Indoor Environmental Bob Thompson, Chair Steve Taylor, Vice-Chair Nancy Clanton Alexis Kurtz George Loisos Prasad Vaidya Daniel Bruck David Lubman Charles Salter Ozgem Omektekin Jude Anders Brian Cloward Larry Dykhuis Francis (Bud) Offerman Christopher Schaffner Dennis Stanke Gensler Athena Sustainable Materials Institute MASCO Retail Cabinet Group Herman Miller, Inc. Quality TAG EPA Indoor Environment Management Branch Taylor Engineering Clanton and Associates OveArup 8cPartners Loisos+ Ubelohde The Weidt Group BRC Acoustics & Tech. David Lubman & Associates Salter Associates DMJM Harris Shoreline Concepts, LLC MithunArchitects+Designers+Planners Herman Miller, Inc Indoor Environmental Engineering The Green Engineer Trane Company The LEED wog for Commercial Interiors Rating System builds on the work of those who helped create previous versions: LEED for Commercial Interiors Version 2.0 Core Committee Holley Henderson, Chair H2 Ecodesign, LLC Denise Van Valkenburg, Vice Chair Steelcase Inc. Penny Banda Environmental Communications Keith Winn Gina Baker Kirsten Childs Don Horn Scot Horst Liana Kallivoka Jill Kowalski Fran Mazarella Roger McFarland Ken Wilson Elaine Aye Carlie Bullock-Jones Rico Cedro Hellen Kessler Mehran Khazra Laurie McMahon Ralph Muehliesen Georgina Sikorski Catalyst Partners Burt Hill Kosar Rittelmann Associates Craton Collaborative Architects,• U.S. General Services Administration Horst, Inc Austin Energy Green Building Program EwingCole U.S. General Services Administration HOK Envision Design Green Building Services Thompson, Ventulett, Stainback & Associates ICrueck & Sexton RIKessler Associates, Inc Guttmann & Blaevoet Consulting Engineer Cassidy & Pinkard Colliers Illinois Institute of Technology INVISTA LEED 2009 FOR COMMERCIAL INTERIORS EFTA00281254 LEED 2009 FOR COMMERCIAL INTERIORS PROJECT CHECKLIST Sustainable Sites K Credit 1 K Credit 2 K Credit 3.1 K Credit 3.2 K Credit 3.3 Site Selection Development Density and Community Connectivity Alternative Transportation—Public Transportation Access Alternative Transportation—Bicycle Storage and Changing Rooms Alternative Transportation—Parking Availability 21 Possible Points 1-5 6 6 2 2 Water Efficiency 11 Possible Points O Prerequisite 1 Water Use Reduction Required K Credit 1 Water Use Reduction 6-11 Energy and Atmosphere • Prerequisite 1 Fundamental Commissioning of Building Energy Systems El Prerequisite 2 Minimum Energy Performance El Prerequisite 3 Fundamental Refrigerant Management K Credit 1.1 Optimize Energy Performance—Lighting Power K Credit 1.2 Optimize Energy Performance—Lighting Controls K Credit 1.3 Optimize Energy Performance—HVAC K Credit 1.4 Optimize Energy Performance—Equipment and Appliances K Credit 2 Enhanced Commissioning K Credit 3 Measurement and Verification K Credit 4 Green Power Materials and O Prerequisite K Credit 1.1 K Credit 1.2 K Credit 2 K Credit 3.1 K Credit 3.2 K Credit 4 K Credit 5 K Credit 6 K Credit 7 Resources Storage and Collection of Recyclables Tenant Space—Long-Term Commitment Building Reuse—Maintain Interior Nonstructural Components Construction Waste Management Materials Reuse Materials Reuse—Furniture and Furnishings Recycled Content Regional Materials Rapidly Renewable Materials Certified Wood Indoor Environmental Quality O Prerequisite 1 • Prerequisite 2 K Credit 1 K Credit 2 K Credit 3.1 K Credit 3.2 Minimum Indoor Air Quality Performance Environmental Tobacco Smoke (ETS) Control Outdoor Air Delivery Monitoring Increased Ventilation Construction Indoor Air Quality Management Plan—During Construction Construction Indoor Air Quality Management Plan—Before Occupancy LEED 2009 FOR COMMERCIAL INTERIORS 37 Possible Points Required Required Required 1-5 1-3 5-10 1-4 5 2-5 5 14 Possible Points Required 1 1-2 1-2 1-2 1 1-2 1-2 1 1 17 Possible Points Required Required 1 1 1 1 vl EFTA00281255 K Credit 4.1 Low-Emitting Materials—Adhesives and Sealants 1 K Credit 4.2 Low-Emitting Materials—Paints and Coatings 1 K Credit 4.3 Low-Emitting Materials—Flooring Systems 1 K Credit 4.4 Low-Emitting Materials—Composite Wood and Agrifiber Products 1 K Credit 4.5 Low-Emitting Materials—Systems Furniture and Seating 1 K Credit 5 Indoor Chemical and Pollutant Source Control 1 K Credit 6.1 Controllability of Systems—Lighting 1 K Credit 6.2 Controllability of Systems—Thermal Comfort 1 K Credit 7.1 Thermal Comfort—Design 1 K Credit 7.2 Thermal Comfort—Verification 1 K Credit 8.1 Daylight and Views—Daylight 1-2 K Credit 8.2 Daylight and Views—Views for Seated Spaces 1 Innovation in Design O Credit 1 O Credit 2 Innovation in Design LEED Accredited Professional Regional Priority K Credit 1 Regional Priority 6 Possible Points 1-5 1 4 Possible Points 1-4 LEED 2009 for Commercial Interiors 100 base points; 6 possible Innovation in Design and 4 Regional Priority points Certified 40-49 points Silver 50-59 points Gold 60-79 points Platinum 80 points and above LEED 2009 FOR COMMERCIAL INTERIORS vii EFTA00281256 LEO) 2009 FOR COMMERCIAL INTERIORS vlll EFTA00281257 Preface FIo CaL17 Introduction I. LEED° Green Building Rating System" II. Overview and Process III. Minimum Program Requirements IV. Exemplary Performance Strategies Minimum Program Requirements Sustainable Sites (SS) Credit 1 Credit 2 Credit 3.1 Credit 3.2 Credit 3.3 1 Site Selection 1 Development Density and Community Connectivity 4 Alternative Transportation—Public Transportation Access 6 Alternative Transportation—Bicycle Storage and Changing Rooms 7 Alternative Transportation—Parking Availability 8 Water Efficiency (WE) Prerequisite 1 Water Use Reduction Credit 1 Water Use Reduction 9 9 11 Energy and Atmosphere (EA) 13 Prerequisite 1 Fundamental Commissioning of Building Energy Systems 13 Prerequisite 2 Minimum Energy Performance 15 Prerequisite 3 Fundamental Refrigerant Management 16 Credit 1.1 Optimize Energy Performance—Lighting Power 17 Credit 1.2 Optimize Energy Performance—Lighting Controls 18 Credit 1.3 Optimize Energy Performance—HVAC 19 Credit 1.4 Optimize Energy Performance—Equipment and Appliances 21 Credit 2 Enhanced Commissioning 22 Credit 3 Measurement and Verification 24 Credit 4 Green Power 26 Materials and Resources (MR) 27 Prerequisite 1 Storage and Collection of Recyclables 27 Credit 1.1 Tenant Space—Long-Term Commitment 28 Credit 1.2 Building Reuse—Maintain Interior Nonstructural Components 29 Credit 2 Construction Waste Management 30 Credit 3.1 Materials Reuse 31 Credit 3.2 Materials Reuse—Furniture and Furnishings 32 Credit 4 Recycled Content 33 LEED 2009 FOR COMMERCIAL INTERIORS Ix EFTA00281258 Credit 5 Regional Materials 34 Credit 6 Rapidly Renewable Materials 35 Credit 7 Certified Wood 36 Indoor Environmental Quality (IEQ) 37 Prerequisite 1 Minimum Indoor Air Quality Performance 37 Prerequisite 2 Environmental Tobacco Smoke (ETS) Control 38 Credit 1 Outdoor Air Delivery Monitoring 40 Credit 2 Increased Ventilation 41 Credit 3.1 Construction Indoor Air Quality Management Plan—During Construction 43 Credit 3.2 Construction Indoor Air Quality Management Plan—Before Occupancy 44 Credit 4.1 Low-Emitting Materials—Adhesives and Sealants 46 Credit 4.2 Low-Emitting Materials—Paints and Coatings 48 Credit 4.3 Low-Emitting Materials—Flooring Systems 49 Credit 4.4 Low-Emitting Materials—Composite Wood and Agrifiber Products 51 Credit 4.5 Low-Emitting Materials—Systems Furniture and Seating 52 Credit 5 Indoor Chemical and Pollutant Source Control 54 Credit 6.1 Controllability of Systems—Lighting 55 Credit 6.2 Controllability of Systems—Thermal Comfort 56 Credit 7.1 Thermal Comfort—Design 57 Credit 7.2 Thermal Comfort—Verification 58 Credit 8.1 Daylight and Views—Daylight 59 Credit 8.2 Daylight and Views—Views for Seated Spaces 63 Innovation in Design (ID) Credit 1 Credit 2 Innovation in Design LEED° Accredited Professional 65 65 66 Regional Priority (RP) 67 Credit 1 Regional Priority 67 LEED 2009 FOR COMMERCIAL INTERIORS x EFTA00281259 L_ I. LEED° GREEN BUILDING RATING SYSTEM Background on LEED' Following the formation of the U.S. Green Building Council (USGBC) in 1993, the organization's members quickly realized that the sustainable building industry needed a system to define and measure "green buildings." USGBC began to research existing green building metrics and rating systems. Less than a year after formation, the members acted on the initial findings by establishing a committee to focus solely on this topic. The composition of the committee was diverse; it included architects, real estate agents, a building owner, a lawyer, an environmentalist, and industry representatives. This cross section of people and professions added a richness and depth both to the process and to the ultimate product. The first LEED Pilot Project Program, also referred to as LEED Version t.o, was launched at the USGBC Membership Summit in August 1998. After extensive modifications, LEED Green Building Rating System Version 2.0 was released in March 2000, with LEED Version 2.1 following in 2002 and LEED Version 2.2 following in zoos. As LEED has evolved and matured, the program has undertaken new initiatives. In addition to a rating system specifically devoted to building operational and maintenance issues (LEED for Existing Buildings: Operations & Maintenance), LEED addresses the different project development and delivery processes that exist in the U.S. building design and construction market, through rating systems for specific building typologies, sectors, and project scopes: LEED for Core & Shell, LEED for New Construction, LEED for Schools, LEED for Neighborhood Development, LEED for Retail, LEED for Healthcare, LEED for Homes, and LEED for Commercial Interiors. Project teams interact with the Green Building Certification Institute (GBCI) for project registration and certification. GBCI was established in 2008 as a separately incorporated entity with the support of the U.S. Green Building Council. GBCI administers credentialing and certification programs related to green building practice. These programs support the application of proven strategies for increasing and measuring the performance of buildings and communities as defined by industry systems such as LEED. The green building field is growing and changing daily. New technologies and products are being introduced into the marketplace, and innovative designs and practices are proving their effectiveness. The LEED rating systems and reference guides will evolve as well. Project teams must comply with the version of the rating system that is current at the time of their registration. USGBC will highlight new developments on its website on a continual basis at www. usgbc.org. Features of LED The LEED Green Building Rating Systems are voluntary, consensus-based, and market-driven. Based on existing and proven technology, they evaluate environmental performance from a whole building perspective over a building's life cycle, providing a definitive standard for what constitutes a green building in design, construction, and operation. The LEED rating systems are designed for rating new and existing commercial, institutional, and residential buildings. They are based on accepted energy and environmental principles and strike a balance between known, established practices and emerging concepts. Each rating system is organized into s environmental categories: Sustainable Sites, Water Efficiency, Energy and Atmosphere, Materials and Resources, and Indoor Environmental LEED 2009 FOR COMMERCIAL INTERIORS xl EFTA00281260 Quality. An additional category, Innovation in Design, addresses sustainable building expertise as well as design measures not covered under the 5 environmental categories. Regional bonus points are another feature of LEED and acknowledge the importance of local conditions in determining best environmental design and construction practices. The LEED Credit Weightings In LEED 2009, the allocation of points between credits is based on the potential environmental impacts and human benefits of each credit with respect to a set of impact categories. The impacts are defined as the environmental or human effect of the design, construction, operation, and maintenance of the building, such as greenhouse gas emissions, fossil fuel use, toxins and carcinogens, air and water pollutants, indoor environmental conditions. A combination of approaches, including energy modeling, life-cycle assessment, and transportation analysis, is used to quantify each type of impact. The resulting allocation of points among credits is called credit weighting. LEED 2009 uses the U.S. Environmental Protection Agency's TRACI' environmental impact categories as the basis for weighting each credit. TRACI was developed to assist with impact evaluation for life-cycle assessment, industrial ecology, process design, and pollution prevention. LEED 2009 also takes into consideration the weightings developed by the National Institute of Standards and Technology (NIST); these compare impact categories with one another and assign a relative weight to each. Together, the 2 approaches provide a solid foundation for determining the point value of each credit in LEED 2009. The LEED 2009 credit weightings process is based on the following parameters, which maintain consistency and usability across rating systems: ■ All LEED credits are worth a minimum oft point. ■ MI LEED credits are positive, whole numbers; there are no fractions or negative values. ■ All LEED credits receive a single, static weight in each rating system; there are no individualized scorecards based on project location. ■ All LEED rating systems have too base points; Innovation in Design (or Operations) and ■ Regional Priority credits provide opportunities for up tom bonus points. Given the above criteria, the LEED 2009 credit weightings process involves 3 steps: 1. A reference building is used to estimate the environmental impacts in 13 categories associated with a typical building pursuing LEE!) certification. 2. The relative importance of building impacts in each category are set to reflect values based on the NIST weightings.' 3. Data that quantify building impacts on environmental and human health are used to assign points to individual credits. Each credit is allocated points based on the relative importance of the building-related impacts that it addresses. The result is a weighted average that combines building impacts and the relative value of the impact categories. Credits that most directly address the most important impacts are given the greatest weight, subject to the system design parameters described above. Credit weights also reflect a decision by LEED to recognize the market implications of point allocation. The result is a significant change in allocation of points compared with previous LEED rating systems. Overall, the changes increase the relative emphasis on the reduction of energy consumption and greenhouse gas emissions associated with building systems, transportation, the embodied energy of water, the embodied energy of materials, and where applicable, solid waste. LEED 2009 FOR COMMERCIAL INTERIORS xii EFTA00281261 The details of the weightings process vary slightly among individual rating systems. For example, LE ED for Existing Buildings: includes credits related to solid waste management but LEED for New Construct ion does not. This results in a difference in the portion of the environmental footprint addressed by each rating system and the relative allocation of points. The weightings process for each rating system is fully documented in a weightings workbook. The credit weightings process will be reevaluated over time to incorporate changes in values ascribed to different building impacts and building types, based on both market reality and evolving scientific knowledge related to buildings. A complete explanation of the LEED credit weightings system is available on the USGBC website, at WNW. pnbC.Olg. Regional Priority Credits To provide incentive to address geographically specific environmental issues, USGBC regional councils and chapters have identified 6 credits per rating system that are of particular importance to specific areas. Each regional priority credit is worth an additional t point, and a total of 4 regional priority points may be earned. Upon project registration, LEED-Online automatically determines a project's regional priority credits based on its zip code. If the project achieves more than 4 regional priority credits, the team can choose the credits for which these points will apply. The USGBC website also contains a searchable database of regional priority credits. II. OVERVIEW AND PROCESS The LEED 2009 Green Building Rating System for Commercial Interiors is a set of performance standards for certifying the design and construction of tenant spaces for office, restaurant, healthcare, hotel/resort and education buildings of all sizes, both public and private. The intent is to promote healthful, durable, affordable, and environmentally sound practices in tenant space design and construction. Prerequisites and credits in the LEED 2009 for Commercial Interiors Rating System addresses 7 topics: ■ Sustainable Sites (SS) ■ Water Efficiency (WE) ■ Energy and Atmosphere (EA) ■ Materials and Resources (MR) ■ Indoor Environmental Quality (IEQ) ■ Innovation in Design (ID) ■ Regional Priority (RP) LEED 2009 for Commercial Interiors certifications are awarded according to the following scale: Certified 40-49 points Silver 50-59 points Gold 60-79 points Platinum 80 points and above GEM will recognize buildings that achieve t of these rating levels with a formal letter of certification. When to Use LEED 2009 for Commercial Interiors LEED zoo9 for Commercial Interiors addresses the specifics of tenant spaces primarily in office, retail, and institutional buildings. Tenants who lease their space or do not occupy the entire building are eligible. LEED 2009 FOR COMMERCIAL INTERIORS EFTA00281262 LEED for Commercial Interiors was designed to work hand-in-hand with the LEED for Core & Shell certification system. LEED for Core & Shell is used by developers to certify the core and shell of a project; it prepares the building for environmentally conscious tenants. Many projects clearly fit the defined scope of only1LEED rating system; others may be eligible for a or more. The project is a viable candidate for LEED certification if it can meet all prerequisites and achieve the minimum points required in a given rating system. If more than t rating system applies, the project team can decide which to pursue. For assistance in choosing the most appropriate LEED rating system, please e-mail leedinfo@usgbc.org. Registration Project teams interested in earning LEED certification for their buildings must first register the project with GBCI. Projects can be registered on the GBCI website (www.gbci.org). The website also has information on registration costs for USGBC national members as well as nonmembers. Registration is an important step that establishes contact with GBCI and provides access to software tools, errata, critical communications, and other essential information. Certification To earn LEED certification, the applicant project must satisfy all the prerequisites and qualify fora minimum number of points to attain the established project ratings as listed below. Having satisfied the basic prerequisites of the program, applicant projects are then rated according to their degree of compliance within the rating system. LEED 2009 for Commercial Interiors provides the option of splitting a certification application into two phases, design and construction, in lieu of a combined design and construction review. Documentation for design phase credits, identified in LEED-Online, can be submitted for review at the end of the design phase; the submittals for these credits can be fully evaluated based on documentation available during this phase of the project. For example, if a project site meets the requirements of LEED for Commercial Interiors SS Credit 3.1, Alternative Transportation— Public Transportation Access, the likelihood of credit achievement can be assessed prior to the completion of construction. The LEED credit itself, however, is not awarded at the design review stage. For more information on the LEED certification process including LEED-Online, Credit Interpretation Requests and Rulings,Appeals, and Fees please see the LEED Reference Guide for Green Building Design and Construction, 2009 Edition and visit www.us gbcAL or www.gbclorg. III. MINIMUM PROGRAM REQUIREMENTS The LEED zoo9 Minimum Program Requirements (MPRs) define the minimum characteristics that a project must possess in order to be eligible for certification under LEED 2009. These requirements define the categories of buildings that the LEED rating systems were designed to evaluate, and taken together serve three goals: to give clear guidance to customers, to protect the integrity of the LEED program, and to reduce challenges that occur during the LEED certification process. It is expected that MPRs will evolve over time along with LEED rating system improvements. The requirements will apply only to those projects registering under LEED 2009. To view the list of MPRs, please read the Minimum Program Requirements section of this document. IV. EXEMPLARY PERFORMANCE STRATEGIES Exemplary performance strategies result in performance that greatly exceeds the performance level or expands the scope required by an existing LEED 2009 for Commercial Interiors credit. To earn exemplary performance credits, teams must meet the performance level defined by the next step in the threshold progression. For credits with more LEED 2009 FOR COMMERCIAL INTERIORS xlv EFTA00281263 than 1 compliance path, an Innovation in Design point can be earned by satisfying more than t compliance path if their benefits are additive. The credits for which exemplary performance points are available through expanded performance or scope are noted in the LEED Reference Guide for Green Interior Design and Construction, 2009 Edition and in LEED-Online. Endnotes Tools for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI). U.S. Environmental Protection Agency, Office of Research and Development. http://www.epa.gov/nrmrl/std/sab/ traci/. Relative impact categoryweights based on an exercise undertaken by NIST (National Institute of Standards and Technology) for the BEES program. http://www.bfrl.nist.govioaejsofnvarefbeesf. LEED 2009 FOR COMMERCIAL INTERIORS xv EFTA00281264 NORMIJIM p DMAY EEMEENERI'S NOTE: Defirctions, exceptions and more extensive guidance on issues in this document are avai ab e 'n a separate document titled: `LEER 2009 MPR Supplemental Guidance'. Terms that are italicized and underlined here are defined in the Supplemental Guidance document (they are marked as such only the first time that they appear). This document identifies the Minimum Program Requirements (MPRs), or minimum characteristics that a project must possess in order to be eligible for LEED Certification. LEED projects must complywith each applicable MPR described below. These requirements define the types of buildings that the LEED Green Building Rating Systems were designed to evaluate, and taken together serve three goals: to give clear guidance to customers, to protect the integrity of the LEED program, and to reduce complications that occur during the LEED Certification process. The requirements in this document will apply to all those, and only those projects certifying under LEED 2009. Projects that upgrade to LEED 2009 from earlier versions of LEE!) are subject to the MPRs. It is expected that MPRs will evolve over time with the LE ED rating system, however only those MPRs in place at the time that a LEED project registers or upgrades will apply to that project. LEED for New Construction, Core & Shell, Schools, and Existing Buildings: Operations & Maintenance were designed to evaluate commercial, institutional, or high-rise residential buildings; as such, any project applying for LEED Certification under one of these rating systems must include a building that falls under one of these categories. LEED for Commercial Interiors was designed to evaluate interior spaces of commercial or institutional buildings; as such, projects applying for certification under LEED for Commercial Interiors must include a space that falls under one of these categories. NOTE: CERTIFICATION MAY BE REVOKED FROM ANY LEED PROJECT UPON GAINING KNOWLEDGE OF NON-COMPLIANCE WITH ANY APPLICABLE MPR. IF SUCH A CIRCUMSTANCE OCCURS, REGISTRATION AND/OR CERTIFICATION FEES WILL NOT BE REFUNDED. All exceptions to MPRs that are not already defined in the LEED 2009 MPR Supplemental Guidance document will be considered on a case-by-case basis for special circumstances. Details on the process for review of MPR clarification requests will be posted in summer 2009. LEED 2009 Minimum Requirements for Commercial Interiors 1. Must Comply with Environmental Laws The LEED project building or space, all other real property within the LEED project boundary, and all go 'e work must comply with all applicable federal, state, and local building-related environmental laws and regulations in place where the project is located. This condition must be satisfied from the date of LEED project registration or the initiation of schematic design, whichever comes first, until the date that the building receives a certificate of occupancy or similar official indication that it is ready for use. 2. Must be a Complete, Permanent Building or Space All LEED projects must be designed for, constructed on, and operated on a permanent location on already existing land. No building or space that is designed to move at any point in its lifetime may pursue LEED Certification. The LEED project scope must include a complete interior space distinct from other spaces within the same building with regards to at least one of the following characteristics: ownership, management, lease, or party wall separation. LEED 2009 FOR COMMERCIAL INTERIORS xvi EFTA00281265 Additionally, construction prerequisites and credits may not be submitted for review until substantial completion of construction has occurred. 3. Must Use a Reasonable Site Boundary If any land was or will be disturbed for the purpose of undertaking the LEED project, then that land must be included within the LEED project boundary. 4. Must Comply with Minimum Floor Area Requirements The LEED project must include a minimum of 250 square feet (22 square meters) of gross floor area. 5. Must Comply with Minimum Occupancy Rates Full Time Equivalent Occupancy The LEED project must server or more Pull Time Equivalent (FTE) occupant(s), calculated as an annual average in order to use LEED in its entirety. If the project serves less than 1 annualized FTE, optional credits from the Indoor Environmental Quality category may not be earned (the prerequisites must still be earned). 6. Must Commit to Sharing Whole-Building Energy and Water Usage Data All certified projects must commit to sharing with USGBC and/or GBCI all available actual whole-project energy and water usage data fora period of at least 5 years. This period starts on the date that the LEED project begins typical physical occupancy if certifying under New Construction, Core & Shell, Schools, or Commercial Interiors, or the date that the building is awarded certification if certifying under Existing Buildings: Operations & Maintenance. Sharing this data includes supplying information on a regular basis in a free, accessible, and secure online tool or, if necessary, taking any action to authorize the collection of information directly from service or utility providers. This commitment must carry forward if the building or space changes ownership or lessee. 7. Must Comply with a Minimum Building Area to Site Area Ratio The gross floor area of the LEED project building must be no less than 2% of the gross land area within the LEED project boundary. LEED 2009 FOR COMMERCIAL INTERIORS xvI I EFTA00281266 LEO) 2009 FOR COMMERCIAL INTERIORS xvill EFTA00281267 NOME:21E SaTES SS Credit 1: Site Selection 1-5 Points Intent 'lb encourage tenants to select buildings that employ best practices systems and green strategies. Requirements OPTION 1 Select a LEED certified building (5 points). OR OPTION 2 Locate the tenant space in a building that has in place t or more of the following characteristics at time of submittal (1 - 5 points). Each of the following options may also be met by satisfying the requirements of the corresponding LEED 2009 for New Construction credit. PATH 1. Brownfield Redevelopment (1 point) Abuilding developed on a site documented as contaminated (by an ASTM 21903-97 Phase II Environmental Site Assessment or a local voluntary cleanup program) OR Abuilding on a site classified as a brovmfield by a local, state or federal government agency. Effective remediation of site contamination must have been completed. PATH 2. Stormwater Design—Quantity Control (1 point) Abuildingthat prior to its development had less than or equal top% imperviousness and has implemented a stormwater management plan that is equal to or is less than the predevelopment 11/2 year 24-hour rate and quantity discharge. OR Abuilding that prior to its development had more than so% imperviousness and has implemented a stormwater management plan that reduced predevelopment 11/2 year 2.4-hour rate and quantity discharge by 25% of the annual on-site stormwater load. This mitigation can be achieved through a variety of measures such as perviousness of site, stormwater retention ponds, and harvesting of rainwater for reuse. Stormwater values are based on actual local rainfall unless the actual exceeds the 10-year annual average local rainfall, in which case the to-year annual average should be used. PATH 3. Stormwater Design—Quality Control (1 point) Abuildingthat has in place site stormwater treatment systems designed to remove at least 80% of the average annual site area's total suspended solids (TSS) and 40% of the average annual site area's total phosphorus (TP). LEED 2009 FOR COMMERCIAL INTERIORS 1 EFTA00281268 These values are based on the average annual loadings from all storms less than or equal to the 2-year 24-hour storm. The building must implement and maintain best management practices (BMPs) outlined in Chapter 4, Part a Urban Runoff, of the EPA Guidance Specifying Management Measures for Sources of Nonpoint Pollution in Coastal Waters, January 1993 (EPA 840B92002) or the local government's BM P document, whichever is more stringent. PATH 4. Heat Island Effect—Nonroof (1 point) Abuilding that provides shade (or will provide shade within 5 years of landscape installation); and/ or uses light-colored or high-albedo materials with a solar reflectance index (SRI)' of at least 29; and/or has open- grid pavement areas that individually or in total equals at least 30% of the site's nonroof impervious surfaces, such as parking areas, walkways, plazas, and fire lanes. OR A building that has placed a minimum of sct%of parking spaces underground or covered by structured parking. OR Abuilding that has an open-grid pavement system (less than so% impervious) for sct% of the parking lot area. PATH 5. Heat Island Effect—Roof (1 point) Abuildingwhose roofing has a solar reflectance index (SRI) of the following minimum values for at least 75% of the roof surface; Rad Tips Slid. H it Low-sloped roof s 2:12 78 Steep-sloped roof > 2:12 29 OR Abuilding that has installed a vegetated roof for at least so% of the roof area. OR Abuilding that has both high SRI roofs and vegetated roofs that satisfy the following area requirement: Tot Area al Roof [ $ k Area of SRI Roof X 1.33 ) ( Area of Vegetated Roof X 2 ) PATH 6. Light Pollution Reduction (1 point) Abuildingwhose nonemergency interior luminaires with a direct line of sight to any openings in the envelope (translucent or transparent) must have their input power reduced (by automatic device) by at least so% between 11.. and 5M. After-hours override may be provided by a manual or occupant-sensing device provided the override lasts no more than 30 minutes. The solar reflectance index (SRI) is a measure of the constructed surface's ability to reflect solar heat, as shown by a small temperature rise. It is defined so that a standard blacksurface (reflectance o.o5, emittanceo.00) is o and a standard white surface (reflectance o.8o, emittance o.90) is too. To calculate the SRI for a given material, obtain the reflectancevalue and cmittance value for thc material.SRI is calculated according to ASTM E 1980. Reflectance is measured according co ASTM E 9o3, ASTM E 1918 or ASTM C 1549. Emittance is measured according to ASTM E 408 or ASTNt C1371. LEO) 2009 FOR COMMERCIAL INTERIORS 2 EFTA00281269 OR A building whose openings in the envelope (translucent or transparent) with a direct line of sight to any nonemergency luminaires must have shielding (with transmittance of less than so%) that is controlled or closed by automatic device between it M. ands. PATH 7. Water Efficient Landscaping—Reduce by 50% (2 points) Abuilding that employs high-efficiency irrigation technology OR uses harvested rainwater or recycled site water to reduce potable water consumption for irrigation by at least so% over conventional means. PATH 8. Water Efficient Landscaping—No Potable Water Use or Irrigation (2 points in addition to Path 7) Abuilding that uses only harvested rainwater or recycled site water to eliminate all potable water use for site irrigation (except for initial watering to establish plants), OR does not have permanent landscaping irrigation systems. PATH 9. Innovative Wastewater Technologies (2 points) Abuildingthat reduces the use of municipally provided potable water for building sewage conveyance by at leastsc%, OR treats t00% of wastewater on-site to tertiary standards. PATH 10. Water Use Reduction-30% Reduction (1 point) Abuilding that meets the 30% reduction in water use requirement for the entire building and has an ongoing plan to require future occupants to comply. PATH 11. On-site Renewable Energy (1-2 points) Abuildingthat supplies at least 2.5% (t point) ors% (z points) of the building's total energy use (expressed as a fraction of annual energy cost) from on-site renewable energy systems. PATH 12. Other Quantifiable Environmental Performance (1 point) Abuildingthat has in place at the time of selection other quantifiable environmental benefits. Potential Technologies & Strategies During the building selection process, give preference to those properties which exhibit green building strategies and technologies. LEED 2009 FOR COMMERCIAL INTERIORS 3 EFTA00281270 SS Credit 2: Development Density and Community Connectivity 6 points Intent To channel development to urban areas with existing infrastructure, protect greenfields and preserve habitat and natural resources. Requirements OPTION 1. Development Density Select space in a building that is located in an established, walkable community with a minimum density of 60,000 square feet per acre net. The density calculation is based on a typical two-story downtown development and must include the area of the project being built. OR OPTION 2. Community Connectivity Select space in a building on a site that meets the following criteria: ■ Is located within 0.-mile of a residential area or neighborhood with an average density of 10 units per acre net ■ Is within 0.-mile of at least 10 basic services ■ Has pedestrian access between the building and the services. For mixed-use projects, no more than 1 service within the project boundary maybe counted as 1 of the 10 basic services, provided it is open to the public. No more than 2. of the 10 services required maybe anticipated (i.e. at least 8 must be existing and operational). In addition, the anticipated services must be documented appropriately to demonstrate that they will be operational in the locations indicated within r year of occupation of the applicant project. Examples of basic services include the following: ■ Bank ■ Place of Worship ■ Convenience Grocery ■ Day Care Center ■ Cleaners ■ Fire Station ■ Beauty Salon ■ Hardware LEED 2009 FOR COMMERCIAL INTERIORS ■ Laundry ■ Library ■ Medical or Dental Office ■ Senior Care Facility ■ Park ■ Pharmacy ■ Post Office ■ Restaurant ■ School ■ Supermarket ■ Theater ■ Community Center ■ Fitness Center ■ Museum 4 EFTA00281271 Proximity is determined by drawing a 112-mile radius around a main building entrance on a site map and counting the services within that radius. Greenfield developments and projects that do not use existing infrastructure are not eligible. Potential Technologies & Strategies During the site selection process, give preference to urban sites with pedestrian access to a variety of services. LEED 2009 FOR COMMERCIAL INTERIORS 5 EFTA00281272 SS Credit 3.1: Alternative Transportation—Public Transportation Access 6 points Intent 'lb reduce pollution and land development impacts from automobile use. Requirements OPTION 1. Rail Station Proximity Locate the project in a building within 1/2-mile walking distance (measured from a main building entrance) of an existing (or planned and funded) commuter rail, light rail or subway station. OR OPTION 2. Bus Stop Proximity Locate the project within 1/4-mile walking distance (measured from a main building entrance) oft or more stops for 2 or more public campus or private bus lines usable by tenant occupants. Potential Technologies & Strategies Perform a transportation survey of potential tenant occupants to identify transportation needs. Locate the building near mass transit. LEED 2009 FOR COMMERCIAL INTERIORS 6 EFTA00281273 SS Credit 3.2: Alternative Transportation—Bicycle Storage and Changing Rooms 2 points Intent 'lb reduce pollution and land development impacts from automobile use. Requirements Provide secure bicycle racks and/or storage (within 200 yards of a main building entrance) for 5% or more of tenant occupants (measured at peak periods). Provide shower and changing facilities in the building, or within zoo yards of a building entrance, for 0.596 of full- time equivalent (FTE) occupants. Potential Technologies & Strategies Select a building with transportation amenities such as bicycle racks and shower/changing facilities or add them as part of the tenant fit-out. LEO) 2009 FOR COMMERCIAL INTERIORS 7 EFTA00281274 SS Credit 3.3: Alternative Transportation—Parking Availability 2 points Intent To reduce pollution and land development impacts from automobile use. Requirements CASE 1. Projects with an Area Less Than 75% of the Total Building Area OPTION 1 Parking spaces provided to tenant must meet but not exceed minimum number required by local zoning regulations. Preferred parking' must be provided for carpools orvanpools capable of serving 5% or more of tenant occupants. OR OPTION 2 No parking is provided or subsidized for tenant occupants. CASE 2. Projects with an Area 75% or More of the Total Building Area OPTION 1 Parking capacity must meet but not exceed minimum local zoning requirements. Preferred parking must be provided for carpools orvanpools, capable of serving596 of the building occupants. OR OPTION 2 No new parking is added for rehabilitation projects. Preferred parking must be provided for carpools or vanpools, capable of senings% of the building occupants. Potential Technologies & Strategies Select a building with minimized car parking capacity and include limited parking inclusions in the lease. Preferred parking refers to the parking spots that arc closest to the main entrance of the project (exclusive of spaces designated for handicapped persons) or parking passes provided at a discounted price. LEED 2009 FOR COMMERCIAL INTERIORS 8 EFTA00281275 MTEE EVYMERCY WE Prerequisite 1: Water Use Reduction Required Intent To increase water efficiency within the tenant space to reduce the burden on municipal water supply and wastewater systems. Requirements Employ strategies that in aggregate use zo% less water than the water use baseline calculated for the tenant space (not including irrigation). Calculate the baseline according to the commercial and/or residential baselines outlined below.' Calculations are based on estimated occupant usage and must include only the following fixtures and fixture fittings (as applicable to he project scope): water closets, urinals, lavatory faucets, showers, kitchen sink faucets and prerinse spray valves. Commercial Fixtures, Fittings, and Appliances Current Baseline Commercial toilets 1.6 gallons per flush (gig)* Except blow-out fixtures: 3.5 (gpf) Commercial urinals 1.0 (gpf) Commercial lavatory (restroom) faucets 2.2 gallons per minute (gpm) at 60 pounds per square inch (psi), private applications only (hotel or motel guest rooms, hospital patient rooms) 0.5 (gpm) at 60 (psi)•• all others except private applications 0.25 gallons per cycle for metering faucets Commercial prerinse spray valves (for food service applications) Flow rates 1.6 (gpm) (no pressure specified: no performance requirement) Residential Fixtures, Fittings, and Appliances Current Baseline _ Residential toilets 1.6 (gpf)•• Residential lavatory (bathroom) faucets 2.2 (gpm) at 60 psi Residential kitchen faucet Residential showerheads 2.5 (gpm) at 80 (psi) per shower stallm* • EPAct 1992 standard for toilets applies to both commercial and residential models. ' 4 In addition to EPAct requirements. the American Societyof Mechanical Engineers standard for public lavatory faucet, is 0.5 gem at 60 psi MUSE A112.18.1. 2005). This maximum has been incorporated into the national Uniform Plumbing Code and the International Plumbing Code. ''' EPAct 1992 standard for toilets applies to both commercial and residential models. "" Residential shunts compartment (stall) in chsellirg units: The total allowable flow rate from all flowing showerheacts at any given time. including rain systems. waterfalls. bcchspears. tochspas and jets. must be limited to the allowable shonethead flow rate as specified above (2.5 gam) per sharer compartment where the floor area of the shower compartment is less than 2.500 square inches. For each increment of 2.500 square inches o4 floor sea thereafter or part thereof. an additional showerhead with total allowable flow rate Iron all I krnirg devices equal to or less than the allowable flow rate as specified above must be allowed. Exception: Showers that emit recirculated nimpotable water originating from within the shower compartment while operating are allowed to exceed the maximum as long as the total potable water flow does not exceed the gay rate as specifed abort. Tables adapted from information developed and summarized by thc U.S. Environmental Protection Agency (EPA) Office of water based on requirements of the Energy PolicyAct (EPAct) of lopz and subsequent nilings by the Department of Energy, requirements of the EPAct of zoos, and theplumbingcode requirements as stated in the zoo6 editions of the Uniform Plumbing Code or International Plumbing Code pertaining to ffictureperformance. LEED 2009 FOR COMMERCIAL INTERIORS 9 EFTA00281276 The following fixtures, fittings and appliances are outside the scope of the water use reduction calculation: ■ Commercial Steam Cookers ■ Commercial Dishwashers ■ Automatic Commercial Ice Makers ■ Commercial (family-sized) Clothes Washers • Residential Clothes Washers • Standard and Compact Residential Dishwashers Potential Technologies & Strategies WaterSense-certified fixtures and fixture fittings should be used where available. Use high-efficiency fixtures (e.g., water closets and urinals) and dry fixtures, such as toilets attached to composting systems, to reduce potable water demand. Consider using alternative on-site sources of water (e.g., rainwater, stormwater, and air conditioner condensate) and graywater for nonpotable applications such as custodial uses and toilet and urinal flushing. The quality of any alternative source of water used must be taken into consideration based on its application or use. LEED 2009 FOR COMMERCIAL INTERIORS 10 EFTA00281277 WE Credit 1: Water Use Reduction 6-11 Points Intent 'lb further increase water efficiency within the tenant space to reduce the burden on municipal water supply and wastewater systems. Requirements Employ strategies that in aggregate use less water than the water use baseline calculated for the tenant space (not including irrigation). The minimum water savings percentage for each point threshold is as follows: Percentage Reduction Points 30% 6 35% 8 40% 11 Calculate the baseline according to the commercial and/or residential baselines outlined below.' Calculations are based on estimated occupant usage and must include only the following fixtures and fixture fittings (as applicable to the project scope): water closets, urinals, lavatory faucets, showers, kitchen sink faucets and pre-rinse spray valves. Commercial Fixtures, Fittings, and Appliances Current Baseline Commercial toilets 1.6 gallons per flush (got)* Except blowout fixtures: 3.5 (gpf) Commercial urinals 1.0 (gpf) Commercial lavatory (restroom) faucets 2.2 gallons per minute (gpm) at 60 pounds per square inch (psi), private applications only (hotel or motel guest rooms. hospital patient rooms) 0.5 (gpm) at 60 (psi)•' all others except private applications 0.25 gallons per cycle for metering faucets Commercial prerinse spray valves (for food service applications) Flow rates 1.6 (gpm) (no pressure specified: no performance requirement) Residential Fixtures, Fittings, and Appliances Current Baseline Residential toilets 1.6 (gull"' Residential lavatory (bathroom) faucets 2.2 (gam) at 60 psi Residential kitchen faucet Residential showerheads 2.5 (gpm) at 80 (psi) per shower stall•••• • EPAct 1992 standard for toilets applies to both cowrie oat and residential models. •• In addition to EPAct requirements. the American Society of Mechanical Engineers standard for public lavatory faucets is 0.5 gpm al 60 psi IASME A112.18.1. 2C05). This maximum has been incorporated into the national Uniform Plumbing Cade and the international Plumbing Code. 44' EPAct 1992 standard for toilets applies to both commercial and residential models. '''' Residential shower compartment (tall) in dwelling units: The total allowable flow rate from all Hewing showerheads at any given lime, including rain systems. waterfalls. bod/sprays. bodyspas and jets. must be limited to the allowable showerhesd flow rate as specified above (2.5 gam) per shower compartment. where the floor area of the shower compartment is less than 2.500 square inches. For each increment of 2.500 square inches of floor area thereafter or part thereof. an additional showerhead with total allowable How rate from all flowing devices equal to or less than the allowable flow rate as specified above must be allowed. Exception. Showers that emit recirculated nonpotable water originating from within the shower compartment while operating are allowed to exceed the imminent as long as the total potable water flow does not exceed the flow rate as specifed abort. Tables adapted from information developed and summarized by the U.B. Environmental Protection Agency (EPA) Office of water based on requirements of the Energy PolicyAct (EPAct) of looz and subsequent rulings by the Department of Energy, requirementsof the EPAct of zoos, and theplumbing code requirements as stated in the zoo6 editions of the Uniform Plumbing Codeor International Plumbing Code pertaining to fixtureperforrnance. LEED 2009 FOR COMMERCIAL INTERIORS 11 EFTA00281278 The following fixtures, fittings and appliances are outside the scope of the water use reduction calculation: ■ Commercial Steam Cookers ■ Commercial Dishwashers ■ Automatic Commercial Ice Makers ■ Commercial (family-sized) Clothes Washers • Residential Clothes Washers • Standard and Compact Residential Dishwashers Potential Technologies & Strategies Use WaterSense-certified fixtures and fixture fittings where available. Use high-efficiency fixtures (e.g., water closets and urinals) and dry fixtures, such as toilets attached to composting systems, to reduce the potable water demand. Consider using alternative on-site sources of water (e.g., rainwater, stormwater, and air conditioner condensate, graywater) for nonpotable applications (e.g., toilet and urinal flushing, custodial uses). The quality of any alternative source of water being used must be taken into consideration based on its application or use. LEED 2009 FOR COMMERCIAL INTERIORS 12 EFTA00281279 EMEEff as &MOW IL EEE EA Prerequisite 1: Fundamental Commissioning of Building Energy Systems Required Intent 'lb verify that the project's energy-related systems are installed and calibrated to performing according to the owner's project requirements, basis of design and construction documents. Benefits of commissioning include reduced energy use, lower operating costs, fewer contractor callbacks, better building documentation, improved occupant productivity, and verification that the systems perform in accordance with the owner's project requirements. Requirements The following commissioning process activities must be completed by the project team: ■ Designate an individual as the commissioning authority (CxA) to lead, review and oversee the completion of the commissioning process activities. • The CxA must have documented commissioning authority experience in at least 2. building projects. • The individual serving as the CxA must be independent of the project's design and construction management, though the CxA may be an employee of any firms providing those services. The CxA may be a qualified employee or consultant of the owner. • The CxA must report results, findings and recommendations directly to the owner. • For projects smaller than 50,000 gross square feet, the ocA maybe a qualified person on the design or construction teams who has the required experience. ■ The owner must document the owner's project requirements. The design team must develop the basis of design. The CxA must review these documents for clarity and completeness. The owner and design team must be responsible for updates to their respective documents. ■ Develop and incorporate commissioning requirements into the construction documents. ■ Develop and implement a commissioning plan. ■ Verify the installation and performance of the systems to be commissioned. ■ Complete a summary commissioning report. Commissioned Systems Commissioning process activities must be completed for the following energy-related systems at a minimum: ■ Heating, ventilating, air conditioning and refrigeration (HVAC&R) systems (mechanical and passive) and associated controls. ■ Lighting and daylighting controls. ■ Domestic hot water systems. ■ Renewable energy systems (e.g. PV, wind, solar). LEED 2009 FOR COMMERCIAL INTERIORS 13 EFTA00281280 Potential Technologies & Strategies Engage a CxA as early as possible in the design process. Determine the owner's project requirements, develop and maintain a commissioning plan for use during design and construction and incorporate commissioning requirements in bid documents. Assemble the commissioning team, and prior to occupancy verify the performance of energy consuming systems. Complete the commissioning reports with recommendations prior to accepting the commissioned systems. Owners are encouraged to seek out qualified individuals to lead the commissioning process. Qualified individuals are identified as those who possess a high level of experience in the following areas: ■ Energy systems design, installation and operation. ■ Commissioning planning and process management. ■ Hands-on field experience with energy systems performance, interaction, start-up, balancing, testing, troubleshooting, operation and maintenance procedures. ■ Energy systems automation control knowledge. Owners are encouraged to consider including water-using systems, building envelope systems, and other systems in the scope of the commissioning plan as appropriate. The building envelope is an important component of a facility which impacts energy consumption, occupant comfort and indoor air quality. While this prerequisite does not require building envelope commissioning, an owner can achieve significant financial savings and reduce risk of poor indoor air quality by including it in the commissioning process. LEED 2009 FOR COMMERCIAL INTERIORS 14 EFTA00281281 EA Prerequisite 2: Minimum Energy Performance Required Intent 'lb establish the minimum level of energy efficiency for the tenant space systems to reduce environmental and economic impacts associated with excessive energy use. Requirements Design portions of the building as covered by the tenant's scope of work to complywith ANSI/ASHRAWIESNA Standard 90.1-2007 (with errata but without addenda'), and complete the following: ■ Complywith the mandatory provisions (Sections 5.4, 64,74 84 94 and 104) of ANSI/ASH RAE/I ESNA Standard 90.1-2007 (with errata but without addenda'). ■ Achieve the prescriptive requirements (Sections 5.5,6.5, 7.5 and 9.5) or performance requirements (Section t t) ofANSIJASHRAWIESNA Standard 90.1-2007 (with errata but without addenda'). ■ Reduce connected lighting power densityro% below that allowed by ANSIJASHRAEJIESNA Standard 90.1- 2007 (with errata but without addenda') using either the Space-by-Space Method or by applying the whole building lighting power allowance to the entire tenant space. ■ Install ENERGY STAR qualified equipment for 50% (by rated-power) of ENERGY STAR eligible equipment' installed as part of the tenant's scope of work. This requirement includes appliances, office equipment, electronics, and commercial food service equipment. Excluded are heating, ventilating and air conditioning (HVAC), lighting, and building envelope products. Projects in California may use Title 24-2005, Part 6 in place of ANSIJASHRAE/IESNA Standard 90.1-2007. Potential Technologies & Strategies Design the systems impacted in the tenant's scope of work to maximize energy performance. Use a computer simulation model to assess the energy performance and identify the most cost-effective energy measures. Quantify energy performance compared with a baseline building. If local code has demonstrated quantitative and textual equivalence following, at a minimum, the U.S. Department of Energy (DOE) standard process for commercial energy code determination, then the local code may be used to satisfy this prerequisite in lieu ofANSIJASHRAEfIESNA Standard 90.1-2007. Details on the DOE process for commercial energy code determination can be found athttp:/Jwww.energycodes.gov/implementfdeterminations_ Project teams wishing to use ASH RAE approved addenda for the purposes of this credit may do so at their discretion. Addenda must be applied consistentlyacross all LEED credits. LEED 2009 FOR COMMERCIAL INTERIORS 15 EFTA00281282 EA Prerequisite 3: Fundamental Refrigerant Management Required Intent '1'o reduce stratospheric ozone depletion. Requirements Zero use of chtorofluorocarbon (CFC)-based refrigerants in tenant heating, ventilating, air conditioning and refrigeration (HVAC&R) systems used within the LEED project scope of work. Potential Technologies & Strategies For new installations, specify new HVAC equipment that uses no CFC-based refrigerants. When reusing existing HVAC systems, conduct an inventory to identify equipment that uses CFC-based refrigerants and replace or retrofit these systems with non-CPC refrigerants. Project teams are encouraged to either locate in buildings that have no CFC-based refrigerants or to influence the building owner to use such systems to reduce ozone depletion. LEED 2009 FOR COMMERCIAL INTERIORS 16 EFTA00281283 EA Credit 1.1: Optimize Energy Performance—Lighting Power 1-5 points Intent To achieve increasing levels of energy conservation beyond the referenced standard to reduce environmental and economic impacts associated with excessive energy use. Requirements Reduce connected lighting power density below that allowed by ANSIJASHRAE/lESNA Standard 90.1-2007 (with errata but without addenda') using either the space-by-space method or by applying the whole building lighting power allowance to the entire tenant space. The points earned for reducing lighting power densitybelow the standard are as follows: Lighting Power Density Reduction below the Standard Points I 15% 1 20% 2 25% 3 30% 4 35% 5 Project teams in California may use Title 24-2005, Part 6 in place of ANSIASHRAWIESNA Standard 90.1-2007. Potential Technologies & Strategies Design the connected lighting power to maximize energy performance. If the project warrants, consider a computer simulation model to assess the performance and identify the most cost-effective energy efficiency measures. Project teams wishing to use ASH RAE approved addenda for the purposes of this prerequisite may do so at their discretion. Addenda must be applied consistently across all LEED credits.. LEED 2009 FOR COMMERCIAL INTERIORS 17 EFTA00281284 EA Credit 1.2: Optimize Energy Performance—Lighting Controls 1-3 points Intent 'lb achieve increasing levels of energy conservation beyond the prerequisite standard to reduce environmental and economic impacts associated with excessive energy use. Requirements Design the project to include t or more of the following independent strategies: ■ Daylight controls for daylit areas: (I point) Install daylight responsive controls in all regularly occupied daylit spaces within 15 feet of windows and under skylights. Daylight controls must switch or dim electric lights in response to the presence or absence of daylight illumination in the space.' ■ Daylight controls for so% of the lighting load: (1 point) Install daylight responsive controls for 50%or more of the connected lighting load and demonstrate that so% of the connected lighting load is daylight responsive. Daylight controls must switch or dim electric lights in response to the presence or absence of daylight illumination in the space./ ■ Occupancy sensors: (t point) Install occupancy sensors for 7596 of the connected lighting load. Potential Technologies & Strategies Design the lighting controls to maximize energy performance. American Society of Heating, Refrigerating, and Air-Conditioning Engineers. ANSIJASHRAEIIESNA Standard 9o.t - zoo79o.1 User's Manual. (Atlanta, zoos). P.9-3 Ibid LEED 2009 FOR COMMERCIAL INTERIORS 18 EFTA00281285 EA Credit 1.3: Optimize Energy Performance—HVAC 5-10 points Intent To achieve increasing levels of energy conservation beyond the prerequisite standard to reduce environmental and economic impacts associated with excessive energy use. Requirement OPTION 1 Implement t or both of the following strategies: ■ Equipment Efficiency—(5 points) Install heating, ventilation and air conditioning (HVAC) systems that complywith the efficiency requirements outlined in the New Building Institute's Advanced Buildings"' Core Performance' Guide Sections14: Mechanical System Design, 24: Mechanical Equipment Efficiency and 3. to: Variable Speed Control. • Appropriate Zoning and Controls: (5 points) Zone tenant fit out of spaces to meet the following requirements: • Every solar exposure must have a separate control zone. • Interior spaces must be separately zoned. • Private offices and special occupancies (conference rooms, kitchens, etc.) must have active controls capable of sensing space use and modulating the HVAC system in response to space demand. OR OPTION 2 Reduce design energy cost compared with the energy cost budget for regulated energy components described in the requirements of ANSIJASHRAE/IESNA Standard 90.1-2007 (with errata but without addenda') AND PATH 1 (5 points) Demonstrate that HVAC system component performance criteria used for tenant space are ts% better than a system in minimum compliance with ANSI/ASHRAWIESNA Standard 90.1-2007 (with errata but without addenda'). OR PATH 2 (10 points) Demonstrate that HVAC system component performance criteria used for tenant space are 3o% better than a system that is in minimum compliance with ANSIJASHRAPIESNA Standard 90.1-2007 (with errata but without addenda'). Project teams wishing to use ASH RAE approved adcknda for the purposes of this credit may do so at their discretion. Addenda must be applied consistentlyacross all LEED credits. LEO) 2009 FOR COMMERCIAL INTERIORS 19 EFTA00281286 Potential Technologies & Strategies Design the HVAC system components to maximize energy performance. Review compliance options for EA Credit 1.3 and determine the most appropriate approach. Option' provides a more prescriptive approach to recognizing energy-efficient HVAC design, while Option z is performance based. LEED 2009 FOR COMMERCIAL INTERIORS 20 EFTA00281287 EA Credit 1.4: Optimize Energy Performance—Equipment and Appliances 1-4 points Intent To achieve increasing levels of energy conservation beyond the prerequisite standard to reduce environmental and economic impacts associated with excessive energy use. Requirements For all ENERGY STAR' qualified equipment and appliances installed as part of the tenant's scope of work, achieve one of the following percentages (by rated power): Percent Installed ENERGY STAR Qualified Equipment of ENERGY STAR Eligible Equipment Points 70% 1 77% 2 84% 3 90% d This requirement applies to appliances, office equipment, electronics, and commercial food service equipment. Excluded are HVAC, lighting, and building envelope products. Potential Technologies & Strategies Select energy-efficient equipment and appliances, as qualified by the EPA's ENERGY STAR Program (httpWwww. energystar.gov). LEED 2009 FOR COMMERCIAL INTERIORS 21 EFTA00281288 EA Credit 2: Enhanced Commissioning 5 points Intent To verify and ensure that the tenant space is designed, constructed and calibrated to operate as intended. Requirements Implement, or have a contract in place to implement, the following additional commissioning process activities in addition to the requirements of EA Prerequisite I: Fundamental Commissioning of the Building Energy Systems: ■ Prior to the start of the construction documents phase, designate an independent commissioning authority (CxA) to lead, review and oversee the completion of all commissioning process activities. • The CxA must have documented commissioning authority experience in at least 2. building projects. • The individual serving as the CxA: - Must be independent of the work of design and construction; - Must not be an employee of the design firm, though he or she may be contracted through them; - Must not be an employee of, or contracted through, a contractor or construction manager holding construction contracts; - May be a qualified employee or consultant of the owner. • The CxA must report results, findings and recommendations directly to the owner. ■ The CxA must conduct, at a minimum, t commissioning design review of the owner's project requirements, basis of design and design documents prior to the mid-construction documents phase and must back-check the review comments in the subsequent design submission. ■ The thcA must review contractor submittals applicable to systems being commissioned for compliance with the owner's project requirements and basis of design. This review must be concurrent with the reviews of the architect or engineer of record and submitted to the design team and the owner. ■ The CxA or other project team members must develop a systems manual that gives future operating staff the information needed to understand and optimally operate the project's commissioned systems. ■ The CxA or other project team members must verify that the requirements for training operating personnel and building occupants have been completed. ■ The thcA must be involved in reviewing the operation of the tenant space with operations and maintenance (=[) staff and occupants within 8 to to months after substantial completion. A plan for resolving outstanding commissioning-related issues must be included. Potential Technologies & Strategies Engage a thuk as early as possible in the design process. Determine the owner's project requirements, develop and maintain a commissioning plan for use during design and construction and incorporate commissioning requirements in bid documents. Assemble the commissioning team, and prior to occupancy verify the performance LEED 2009 FOR COMMERCIAL INTERIORS 22 EFTA00281289 of energy-consuming systems. Complete the commissioning reports with recommendations prior to acceptance of the commissioned systems. Owners are encouraged to seek out qualified individuals to lead the commissioning process. Qualified individuals are identified as those who possess a high level of experience in the following areas: ■ Energy systems design, installation and operation ■ Commissioning planning and process management ■ Hands-on field experience with energy systems performance, interaction, start-up, balancing, testing, troubleshooting, operation, and maintenance procedures ■ Energy systems automation control knowledge Owners are encouraged to consider including water-using systems, building envelope systems, and other systems in the scope of the commissioning plan as appropriate. The building envelope is an important component of a facility which impacts energy consumption, occupant comfort and indoor air quality. While this prerequisite does not require building envelope commissioning, an owner can receive significant financial savings and reduce risk of poor indoor air quality by including it in the commissioning process. The LEED Reference Guide for Green Interior Design and Construction, 2009 Edition provides detailed guidance on the rigor expected for the following process activities: ■ Owner's project requirements. ■ Basis of design. ■ Commissioning plan. ■ Commissioning specification. ■ Performance verification documentation. ■ Commissioning report. LEED 2009 FOR COMMERCIAL INTERIORS 23 EFTA00281290 EA Credit 3: Measurement and Verification 2-5 points Intent 'lb provide for the ongoing accountability and optimization of tenant energy and water consumption performance over time. Requirements CASE 1. Projects Less Than 75% of the Total Building Area Complete 1 or more of the following: ■ Install submetering equipment to measure and record energy use within the tenant space. (2 points) ■ Negotiate a lease whereby energy costs are paid by the tenant and not included in the base rent. (3 points) OR CASE 2. Projects 75% or More of the Total Building Area Install continuous metering equipment for the following end uses: (3 points) ■ Lighting systems and controls. ■ Constant and variable motor loads. ■ Variable frequency drive operation. ■ Chiller efficiency at variable loads (kWiton). ■ Cooling load. ■ Air and water economizer and heat recovery cycles. ■ Air distribution static pressures and ventilation air volumes. ■ Boiler efficiencies. ■ Building-related process energy systems and equipment. ■ Indoor water riser and outdoor irrigation systems. LEED 2009 FOR COMMERCIAL INTERIORS 24 EFTA00281291 Develop and implement a measurement and verification I_ ) plan that incorporates the monitoring information from the above end uses and is consistent with Option B, C or D of the 2001 International Performance Measurement & Verification Protocol (IPMVP) Volume I: Concepts and Options for Determining Energy and Water Savings. Provide a process for corrective action if the results of the- plan indicate that energy savings are not being achieved. Potential Technologies & Strategies For projects with an area that constitutes less than 75% of the total building area, tenant space is submetered and has a direct pay clause in their lease for energy actually used instead of on a square foot basis. For projects with an area that constitutes 75% or more of the total building area, model the energy and water systems to predict savings. Design the project with equipment to measure energy and water performance. Draft a plan to apply during building operations that compares predicted savings to those actually achieved in the field. LEED 2009 FOR COMMERCIAL INTERIORS 25 EFTA00281292 EA Credit 4: Green Power 5 points Intent To encourage the development and use of grid-source, renewable energy technologies on a net zero pollution basis. Requirements OPTION 1 Engage in at least a 2-year renewable energy contract to provide at least so% of the tenant's electricity from renewable sources,as defined by the Center for Resource Solutions' Green-e energy product certification requirements. All purchases of green power must be based on the quantity of energy consumed, not the cost, as determined by the annual electricity consumption results of EA Credit 1, Optimize Energy Performance. OR OPTION 2 Engage in at least a 2-year renewable energy contract to purchase at least 8 kilowatt hours per square foot per year from renewable electricity sources as defined by the Center for Resource Solutions (CRS) Green-e Energy's product certification requirements. All purchases of green power must be based on the quantity of energy consumed, not the cost. Potential Technologies & Strategies Determine the energy needs of the tenant space and investigate opportunities to engage in a green power contract. Green power is derived from solar, wind, geothermal, biomass or low-impact hydro sources. Visit limsii/www. green-e.orgfray for details about the Green-e Energy program. The power product purchased to complywith credit requirements need not be Green-e Energy certified. Other sources of green power are eligible if they satisfy the Green-e Energy program's technical requirements. Renewable energy certificates (RECs), tradable renewable certificates (TRCs), green tags and other forms of green power that comply with the technical requirements of the Green-e Energy program may be used to document compliance with this credit. LEED 2009 FOR COMMERCIAL INTERIORS 26 EFTA00281293 HEIMM Rs EESOURCES MR Prerequisite 1: Storage and Collection of Recyclables Required Intent 'lb facilitate the reduction of waste generated by building occupants that is hauled to and disposed of in landfills. Requirements Provide an easily accessible dedicated area or areas for the collection and storage of materials for recycling for the tenant space. Materials must include at a minimum paper, corrugated cardboard, glass, plastics, and metals. Potential Technologies & Strategies Designate an area for recyclable collection and storage that is appropriately sized and located in a convenient area. Identify local waste handlers and buyers for glass, plastic, metals, office paper, newspaper, cardboard and organic wastes. Instruct occupants on recycling procedures. Instruct occupants on the recycling procedures. Consider employing cardboard balers, aluminum can crushers, recycling chutes and other waste management strategies to further enhance the recycling program. LEE) 2009 FOR COMMERCIAL INTERIORS 27 EFTA00281294 MR Credit 1.1: Tenant Space—Long-Term Commitment 1 point Intent To encourage choices that will conserve resources, reduce waste and reduce the environmental impacts of tenancy as they relate to materials, manufacturing and transport. Requirements The occupant or tenant must commit to remain in the same location for a minimum ofio years. Potential Technologies & Strategies Suggest negotiations resulting in longer leases or ownership. LEO) 2009 FOR COMMERCIAL INTERIORS 28 EFTA00281295 MR Credit 1.2: Building Reuse—Maintain Interior Nonstructural Components 1-2 Points Intent 'lb extend the life cycle of existing building stock, conserve resources, retain cultural resources, reduce waste and reduce environmental impacts of new buildings as they relate to materials manufacturing and transport. Requirements Maintain at least 40% or 60% by area of the existing non-shell, nonstructural components (e.g., walls, flooring and ceiling systems). The minimum percentage interior component reuse for each point threshold is as follows: Interior Reuse Points 40% 60% 2 Potential Technologies & Strategies Identify during the selection and design of the tenant space the potential to maintain as many of the existing interior elements as possible. Remove elements that pose a contamination risk to occupants, and update components that would improve energy and water efficiency, such as mechanical systems and plumbing fixtures. Quantify the extent of building reuse. LEED 2009 FOR COMMERCIAL INTERIORS 29 EFTA00281296 MR Credit 2: Construction Waste Management 1-2 Points Intent 'lb divert construction and demolition debris from disposal in landfills and incineration facilities. Redirect recyclable recovered resources back to the manufacturing process and reusable materials to appropriate sites. Requirements Recycle and/or salvage nonhazardous construction and demolition debris. Develop and implement a construction waste management plan that, at a minimum, identifies the materials to be diverted from disposal and whether the materials will be sorted on-site or comingled. Excavated soil and land-clearing debris do not contribute to this credit. Calculations can be done by weight or volume, but must be consistent throughout. The minimum percentage debris to be recycled or salvaged for each point threshold is as follows: r Recycled or Sahnedi 50% 75% 2 Potential Technologies & Strategies Establish goals for diversion from disposal in landfills and incineration facilities and adopt a construction waste management plan to achieve these goals. Consider recycling cardboard, metal, brick, concrete, plastic, clean wood, glass, gypsum wallboard, carpet and insulation. Construction debris processed into a recycled content commodity that has an open market value (e.g., wood derived fuel [WDF], alternative daily cover material, etc.) may be applied to the construction waste calculation. Designate a specific area(s) on the construction site for segregated or commingled collection of recyclable materials, and track recycling efforts throughout the construction process. Identify construction haulers and recyclers to handle the designated materials, and seek verification that the diverted materials are recycled or salvaged, as intended. Note that diversion may include donation of materials to charitable organizations and salvage of materials on site. For commercial interior projects the recycling rate for the landlord's demolition activity (before delivery to the tenant) can contribute to the project calculations for this credit if the team so chooses. LEED 2009 FOR COMMERCIAL INTERIORS 30 EFTA00281297 MR Credit 3.1: Materials Reuse 1-2 points Intent lb reuse building materials and products to reduce demand for virgin materials and reduce waste, thereby lessening impacts associated with the extraction and processing of virgin resources. Requirements Use salvaged, refurbished or reused materials, the sum of which constitutes at least s% or to%, based on cost, of building (construction) materials, excluding furniture and furnishings The minimum percentage materials reused for each point threshold is as follows: Reused Materials Points 5% I 10% Potential Technologies & Strategies Identify opportunities to incorporate salvaged materials into project design and research potential material suppliers. Consider salvaged materials such as beams and posts, flooring, paneling, doors and frames, cabinetry, brick, and decorative items. LEED 2009 FOR COMMERCIAL INTERIORS 31 EFTA00281298 MR Credit 3.2: Materials Reuse—Furniture and Furnishings 1 point Intent To reuse building materials and products to reduce demand for virgin materials and reduce waste, thereby reducing impacts associated with the extraction and processing of virgin resources. Requirements Use salvaged, refurbished or used furniture and furnishings for 30% of the total furniture and furnishings budget. Potential Technologies & Strategies Identify opportunities to incorporate salvaged and reuse furniture into project design and research potential material suppliers. Consider salvaging and reusing systems furniture and furnishings such as case pieces, seating, filing systems, decorative lighting and accessories. LEED 2009 FOR COMMERCIAL INTERIORS 32 EFTA00281299 MR Credit 4: Recycled Content 1-2 points Intent 'lb increase demand for building products that incorporate recycled content materials, thereby reducing impacts resulting from extraction and processing of virgin materials. Requirements Use materials, including furniture and furnishings, with recycled content' such that the sum of postconsumers recycled content plus t/2 of the preconsumers content constitutes at least 1O% or 2O% based on cost of the total value of the materials in the project. The minimum percentage materials recycled for each point threshold is as follows: Recycled Coded Polnb 10% I 20% 2 The recycled conten value of a material or furnishing is determined by weight. The recycled fraction of the assembly is then multiplied by the cost of assembly to determine the recycled content value. Mechanical, electrical and plumbing components cannot be included in this calculation. Potential Technologies & Strategies Establish a project goal for recycled content materials, and identify material suppliers that can achieve this goal. During construction, ensure that the specified recycled content materials are installed. Consider a range of environmental, economic and performance attributes when selecting products and materials. Recycled content is defined in accordance with the International Organization of Standards document, ISO mon — Environmental labels and declarations —Self-declared environmental claims (Type II environmental labeling). z Rostconsumer material is defined as waste material generated by households or by commercial, industrial and institutional facilities in their role as end-users of the product, which can no longer be used for its intended purpose. 3 Rreconsumer material is defined as material diverted from the waste stream during the manufacturing process. Rcutilization of materials (i.e., rework, regrind or scrap generated in a process and capable of being reclaimed within the same process that generated it) is excluded. LEED 2009 FOR COMMERCIAL INTERIORS 33 EFTA00281300 MR Credit 5: Regional Materials 1-2 Points Intent 'lb increase demand for building materials and products that are extracted and manufactured within the region, thereby supporting the regional economy and reducing the environmental impacts resulting from transportation. Requirements OPTION 1 (1 point) Use a minimum of 20% of the combined value of construction and Division 12 (Furniture) materials and products that are manufactured' regionally within a radius of 500 miles. OR OPTION 2 (2 points) Meet the requirements for Option 1. Use a minimum of to% of the combined value of construction and Division t2 (furniture) materials and products extracted, harvested or recovered, as well as manufactured, within soo miles of the project. Potential Technologies & Strategies Establish a project goal for locally sourced materials and identify materials and material suppliers that can achieve this goal. During construction, ensure that the specified local materials are installed and quantify the total percentage of local materials installed. Consider a range of environmental, economic and performance attributes when selecting products and materials. Manufacturing refers to the final assembly of components into the building product that is furnished and installed by the tradesmen. For example, if the hardware comes from Dallas, Texas, the lumber from Vancouver, British Columbia, and the joist is assembled in Kent, Washington, then the location of the final assembly is Kent, Washington LEED 2009 FOR COMMERCIAL INTERIORS 34 EFTA00281301 MR Credit 6: Rapidly Renewable Materials 1 Point Intent To reduce the use and depletion of finite raw materials and long-cycle renewable materials by replacing them with rapidly renewable materials. Requirements Use rapidly renewable construction and Division 12 (Furniture and Furnishings) materials and products for s% of the total value of all materials and products used in the project, based on cost. Rapidly renewable building materials and products are made from plants that are typically harvested within a 1O-year or shorter cycle. Potential Technologies & Strategies Establish a project goal for rapidly renewable materials and identify materials and suppliers that can achieve this goal. Consider materials such as bamboo flooring, wool carpets, straw board, cotton ban insulation, linoleum flooring, poplar OSB, sunflower seed board, wheatgrass cabinetry and others. During construction, ensure that the specified rapidly renewable materials are installed. LEED 2009 FOR COMMERCIAL INTERIORS 35 EFTA00281302 MR Credit 7: Certified Wood 1 Point Intent 'lb encourage environmentally responsible forest management. Requirements When using new wood-based products and materials, use a minimum of so% that are certified in accordance with the Forest Stewardship Council's principles and criteria. Division 12 (Furniture) material value is included in the determination of the certified wood content. Potential Technologies & Strategies Establish a project goal for FSC-certified wood products and identify suppliers that can achieve this goal. During construction, ensure that the FSC-certified wood products are installed and quantify the total percentage of FSC- certified wood products installed. LEED 2009 FOR COMMERCIAL INTERIORS 36 EFTA00281303 MODE) ERM2OHNERM CIUMEY IEQ Prerequisite 1: Minimum Indoor Air Quality Performance Required Intent lb establish minimum indoor air quality (IAQ) performance to enhance indoor air quality in buildings, thus contributing to the comfort and well-being of the occupants. Requirements Meet the minimum requirements of Section 4 through 7 of ASH RAE Standard 62.1-2007, Ventilation for Acceptable Indoor Air Quality (with errata but without addenda'). AND CASE 1. Mechanically Ventilated Spaces Mechanical ventilation systems must perform according to the ventilation rate procedure. Modify or maintain existing building outside-air ventilation distribution system to supply at least the outdoor air ventilation rate required byASH RAE Standard 62.1-2007 (with errata but without addenda'). If the project team cannot meet the outside air requirements ofASHRAE Standard 62.1-2007 (with errata but without addenda') document the space and system constraints that make it not possible, complete an engineering assessment of the system's maximum cubic feet per minute (dm) capability toward meeting the requirements of ASHRAE Standard 62.1-2007 (with errata but without addenda'), and achieve those levels, with a minimum of to cfm per person. All other requirements must be met. CASE 2. Naturally Ventilated Projects Naturally ventilated buildings must comply with ASHRAE Standard 62.1-2007 Section 5.1 (with errata but without addenda'). Potential Technologies & Strategies Design ventilation systems to meet or exceed the minimum outdoor air ventilation rates as described in the ASHRAE standard. Balance the impacts of ventilation rates on energy use and indoor air quality to optimize for energy efficiency and occupant comfort. Use the ASHRAE Standard 62.1-2007 Users Manual (with errata but without addenda') for detailed guidance on meeting the referenced requirements. Project teams uishing to use ASH RAE approved addenda for the purposes of this prerequisite may do soar their discretion. Addenda must be applied consistently across all LEED credits LEED 2009 FOR COMMERCIAL INTERIORS 37 EFTA00281304 IEQ Prerequisite 2: Environmental Tobacco Smoke (ETS) Control Required Intent To prevent or minimize exposure of building occupants, indoor surfaces and ventilation air distribution systems to environmental tobacco smoke (ETS). Requirements CASE 1. Non-Residential Projects OPTION 1 Locate tenant space in a building that prohibits smoking by all occupants and users, within zs feet of entries, outdoor air intakes and operable windows. OR OPTION 2 Confirm that smoking is prohibited in the portions of the tenant space not designated as a smoking space, all other building areas served by the same HVAC system, and the common areas used by occupants. Ensure that ETS cannot migrate by either mechanical or natural ventilation from other areas of the building. lithe occupants are permitted to smoke, provide one or more designated smoking rooms designed to contain, capture and remove ETS from the building. At a minimum, each smoking room must be directly exhausted to the outdoors, with no recirculation of ETS-containing air to nonsmoking areas, enclosed with impermeable deck-to•deck partitions, and operated at a negative pressure compared with surrounding spaces of at least an average of 5 Pa (0.02 inches of water gauge) and with a minimum oft Pa (0.004 inches of water gauge) when the doors to the smoking rooms are closed. Verify performance of the smoking rooms differential air pressure by conductingts minutes of measurement, with a minimum oft measurement every to seconds, of the differential pressure in the smoking room with respect to each adjacent area and in each adjacent vertical chase with the doors to the smoking rooms closed. Conduct the testing with each space configured for worst case conditions of transport of air from the smoking rooms (with doors closed) to adjacent spaces. CASE 2. Multi-Unit Residential Buildings Minimize uncontrolled pathways for ETS transfer between individual residential units by sealing penetrations in walls, ceilings, and floors in the residential units and by sealing vertical chases adjacent to the units. Weather-strip all doors in the residential units leading to common hallways to minimize air leakage into the hallway. Demonstrate acceptable sealing of residential units by conducting a blower door test in accordance with ANSIIASTM-779-99, Standard Test Method for Determining Air Leakage Rate by Fan Pressurization, LEED 2009 FOR COMMERCIAL INTERIORS 38 EFTA00281305 Use the progressive sampling methodology defined in Chapter 7 (Home Energy Rating Systems (HERS) Required Verification and Diagnostic Testing) of the California Low Rise Residential Alternative Calculation Method Approval Manual, found at (httpdAvww.energy.ca.govItitle dard m CHAPTER07.01). Residential units must demonstrate less than 1.25 square inches of leakage area per 100 square feet of enclosure area (i.e., sum of all wall, ceiling and floor areas). Potential Technologies & Strategies Prohibit smoking in the building or provide negative pressure smoking rooms. For residential buildings, a third option is to provide very tight construction to minimize ETS transfer among dwelling units. LEED 2009 FOR COMMERCIAL INTERIORS 39 EFTA00281306 IEQ Credit 1: Outdoor Air Delivery Monitoring 1 point Intent 'lb provide capacity for ventilation system monitoring to promote occupant comfort and well-being. Requirements Install permanent monitoring systems to ensure that ventilation systems maintain design minimum requirements. Configure all monitoring equipment to generate an alarm when the airflow values or carbon dioxide(CO2) levels vary by io% or more from the design values, via either a building automation system alarm to the building operator or a visual or audible alert to the building occupants AND CASE 1. Mechanically Ventilated Spaces Monitor CO2 concentrations within all densely occupied spaces (those with a design occupant density of 25 people or more per 1000 square feet). CO2 monitors must be between 3 and 6 feet above the floor. Provide a direct outdoor airflow measurement device capable of measuring the minimum outdoor air intake flow with an accuracy of plus or minus is% of the design minimum outdoor air rate, as defined by ASHRAE 62. t-zoo7 (with errata but without addenda') for mechanical ventilation systems where zo% or more of the design supply airflow serves nondensely occupied spaces, CASE 2. Naturally Ventilated Spaces Monitor CO2 concentrations within all naturally ventilated spaces. C0z monitors must be between 3 feet and 6 feet above the floor. One CO2 sensor may be used to monitor multiple nondensely occupied spaces if the natural ventilation design uses passive stack(s) or other means to induce airflow through those spaces equally and simultaneously without intervention by building occupants'. Potential Technologies & Strategies Install CO2 and airflow measurement equipment and feed the information to the heating, ventilation and air conditioning (HVAC) system and/or Building Automation System (BAS) to trigger corrective action, if applicable. If such automatic controls are not feasible with the building systems, use the measurement equipment to trigger alarms that inform building operators or occupants of a possible deficiency in outdoor air delivery. Project teams wishing to use ASH RAE approved adcknda for the purposes of this credit may do so at their discretion. Addenda must be applied consistently across all LEED credits. COz monitoring is required in all denselyoccupied spaces, regardless of design approach LEO) 2009 FOR COMMERCIAL INTERIORS 40 EFTA00281307 IEQ Credit 2: Increased Ventilation 1 point Intent 'lb provide additional air ventilation to improve indoor air quality for improved occupant comfort, well-being and productivity. Requirements CASE 1. Mechanically Ventilated Spaces Increase breathing zone outdoor air ventilation rates to all occupied spaces by at least 30% above the minimum rates required by ASHRAE 62.1-2007 (with errata but without addenda') as determined by IEQ Prerequisite 1: Minimum Indoor Air Quality Performance. CASE 2. Naturally Ventilated Spaces Design natural ventilation systems for occupied spaces to meet the recommendations set forth in the Carbon Trust's Good Practice Guide 237 (1998). Determine that natural ventilation is an effective strategy for the project by following the flow diagram process shown in Figure 1.18 of the Chartered Institution of Building Services Engineers (CIBSE) Applications Manual to: zoos, Natural Ventilation in Non-domestic Buildings AND OPTION 1 Use diagrams and calculations to show that the design of the natural ventilation systems meets the recommendations set forth in the CIBSE Applications Manual to: zoos, Natural Ventilation in Non-domestic Buildings. OR OPTION 2 Use a macroscopic, multizone, analytic model to predict that room-by-room airflows will effectively naturally ventilate, defined as providing minimum ventilation rates required by ASHRAE 62. t-zoo7 Chapter 6 (with errata but without addenda'), for at least 90% of occupied spaces. Potential Technologies & Strategies For mechanically ventilated spaces: Design ventilation systems to provide breathing zone ventilation rates at least 30% larger than the minimum rates prescribed by the referenced standard. Project teams nishing to use ASH RAE approved addenda for the purposes of this credit may do so at their discretion. Addenda must be applied consistently across all LEED credits LEO) 2009 FOR COMMERCIAL INTERIORS 41 EFTA00281308 For naturally ventilated spaces, follow the 8 design steps described in Carbon Trust Good Practice Guide 237• ■ Develop design requirements. ■ Plan airflow paths. ■ Identify building uses and features that might require special attention. ■ Determine ventilation requirements. ■ Estimate external driving pressures. ■ Select types of ventilation devices. ■ Size ventilation devices. ■ Analyze the design. Use public domain software such as NIST's CONTAM, Multizone Modeling Software, along with LoopDA, Natural Ventilation Sizing Tool, to analytically predict room•by-room airflows. LEED 2009 FOR COMMERCIAL INTERIORS 42 EFTA00281309 IEQ Credit 3.1: Construction Indoor Air Quality Management Plan—During Construction 1 point Intent To reduce indoor air quality (IAQ) problems resulting from construction or renovation and promote the comfort and well-being of construction workers and building occupants. Requirements Develop and implement an IAQ management plan for the construction and preoccupancy phases of the tenant space as follows: ■ During construction, meet or exceed the recommended design approaches of the Sheet Metal and Air Conditioning National Contractors Association (SMACNA) IAQ Guidelines for Occupied Buildings Under Construction, and Edition 2007, ANSI/SMACNA 008-2o08 (Chapter 3). ■ Protect stored on-site and installed absorptive materials from moisture damage. ■ If permanently installed air handlers are used during construction, filtration media with a minimum efficiency reporting value (MERV) of 8 must be used at each return air grille, as determined by ASHRAE 52.2-1999. (with errata but without addenda').Replace all filtration media immediately prior to occupancy. Potential Technologies & Strategies Adopt an IAQ management plan to protect the heating, ventilating and air conditioning (HVAC) system during construction, control pollutant sources and interrupt contamination pathways. Sequence the installation of materials to avoid contamination of absorptive materials, such as insulation, carpeting, ceiling tile and gypsum wallboard. Coordinate with IEQ Credit 3.2: Construction IAQ Management Plan - Before Occupancy and IEQ Credit 5: Indoor Chemical & Pollutant Source Control to determine the appropriate specifications and schedules for filtration media. If possible, avoid using permanently installed air handlers for temporary heating/cooling during construction. Consult the LEED Reference Guide for Green Interior Design and Construction, 2039 Edition for more detailed information on how to ensure the well-being of construction workers and building occupants if permanently installed air handlers must be used during construction. Project tcamsnishing to usc ASHRAE approved addenda for the purposes of this credit may do so at their discrction.Addenda must be applied consistently across all LEED credits. LEED 2009 FOR COMMERCIAL INTERIORS 43 EFTA00281310 IEQ Credit 3.2: Construction Indoor Air Quality Management Plan—Before Occupancy 1 point Intent To reduce indoor air quality (IAQ) problems resulting from construction or renovation and promote the comfort and well-being of workers and occupants. Requirement Develop an IAQ management plan and implement it after all finishes have been installed and the building has been completely cleaned before occupancy. OPTION 1. Flush-Out' PATH 1 After construction ends, prior to occupancy and with all interior finishes installed, install new filtration media and flush-out the building by supplying a total air volume of 14,00o cubic feet of outdoor air per square foot of floor area while maintaining an internal temperature of at least 60oF and, where mechanical cooling is operated, relative humidity no higher than 60%. OR PATH 2 If occupancy is desired prior to completion of the flush-out, the space may be occupied following delivery of a minimum of 3,sec cubic feet of outdoor air per square foot of floor area. Once the space is occupied, it must be ventilated at a minimum rate of 0.30 cubic feet per minute (cfm) per square foot of outside air or the design minimum outside air rate determined in EQ Prerequisite Minimum IAQ Performance, whichever is greater. During each day of the flush-out period, ventilation must begin a minimum of 3 hours prior to occupancy and continue during occupancy. These conditions must be maintained until a total of 4,000 cubic feet per square foot of outside air has been delivered to the space. OR OPTION 2. Air Testing Conduct baseline IAQ testing after construction ends and prior to occupancy, using testing protocols consistent with the EPA Compendium of Methods for the Determination of Air Pollutants in Indoor Air and as additionally detailed in the LEED Reference Guide for Green Interior Design and Construction, 2009 Edition. t All finishes must be installed prior to flush-out LEED 2009 FOR COMMERCIAL INTERIORS 44 EFTA00281311 Demonstrate that the contaminant maximum concentration levels listed below are not exceeded: Contaminant Maximum Concentration Formaldehyde 27 pads per billion Particulates (PM10) 50 micrograms per cubic meter Total volatile organic compounds (MGs) 500 micrograms per cubic meter d-Phenylcyclohexene (d-PCH)• 6.5 micrograms per cubic meter Carbon monoxide (CO) 9 part pa million and no greater than 2 parts per million above outdoor levels *This test is required only it carpets and labia with styrene butadiene rubber ISBRI latex backing are installed as part of the base building systems. For each sampling point where the maximum concentration limits are exceeded, conduct an additional flush-out with outside air and retest the noncompliant concentrations. Repeat until all requirements have been met. When retesting noncompliant building areas, take samples from the same locations as in the first test. Conduct the air sample testing as follows: • All measurements must be conducted prior to occupancy, but during normal occupied hours, with the building ventilation system started at the normal daily start time and operated at the minimum outside air flow rate for the occupied mode throughout the test. ■ All interior finishes must be installed, including but not limited to millwork, doors, paint, carpet and acoustic tiles. Movable furnishings such as workstations and partitions must be in place. ■ The number of sampling locations will depend on the size of the building and number ofventilation systems. For each portion of the building served by a separate ventilation system, the number of sampling points must not be less than 1 per 25,oOO square feet or for each contiguous floor area, whichever is larger. Include areas with the least ventilation and greatest presumed source strength. ■ Air samples must be collected between 3 and 6 feet from the floor to represent the breathing zone of occupants, and over a minimum 4-hour period. Potential Technologies & Strategies Prior to occupancy, perform a building flush-out or test the air contaminant levels in the building. The flush-out is often used where occupancy is not required immediately upon substantial completion of construction. IAQ testing can minimize schedule impacts but maybe more costly. Coordinate with IEQ Credit 3.1: Construction IAQ Management Plan—During Construction and IEQ Credit 5: Indoor Chemical & Pollutant Source Control to determine the appropriate specifications and schedules for filtration media. The intent of this credit is to eliminate IAQ problems that occur as a result of construction. Architectural finishes used in tenant build-outs constitute a significant source of air pollutants and must be addressed in order to qualify for this credit. LEED 2009 FOR COMMERCIAL INTERIORS 45 EFTA00281312 IEQ Credit 4.1: Low-Emitting Materials—Adhesives and Sealants 1 point Intent To reduce the quantity of indoor air contaminants that are odorous, potentially irritating and/or harmful to the comfort and well-being of installers and occupants. Requirements All adhesives and sealants used on the interior of the building (i.e. inside of the weatherproofing system and applied on-site) must comply with the requirements as applicable to the project scope:' • Adhesives, sealants and sealant primers must comply with South Coast Air Quality Management District (SCAQMD) Rule 1165. Volatile organic compound (VOC) limits listed in the table below were effective July 1, 2005 with a rule amendment date of January 7, 2005. Architectural Applications VOC Limit (VI less water) Specialty Application,. VOC Limit (g/L less water) Indoor carpet adhesives 50 PVC welding 510 Carpet pad adhesives 50 CPVC welding 490 Wood flooring adhesives 100 ABS welding 325 Rubber floor adhesives 60 Plastic cement welding 250 Subfloor adhesives 50 Adhesive primer for plastic 550 Ceramic tile adhesives 65 Contact adhesive 80 VCT and asphalt adhesives 50 Special purpose contact adhesive 250 Drywall and panel adhesives 50 Structural wood member adhesive 140 Cove base adhesives 50 Sheet applied rubber lining operations 850 Multipurpose construction adhesives 70 Top and trim adhesive 250 Structural glazing adhesives 100 Substrate Specific Applications VOL Limit (g/L less water) Sealants VOC Limit (g/L less water) Metal to metal 30 Architectural 250 Plastic foams 50 Nonmembrane roof 300 Porous material (except wood) 50 Roadway 250 Wood 30 Singe-ply roof membrane 450 Fiberglass 80 Other 420 Sealant Prima, VOC Limit (eft less water) Architectural. nonporous 250 Architectural. porous 775 Other 750 The use of a VOC budget is permissible for compliance with this credit. LEED 2009 FOR COMMERCIAL INTERIORS 46 EFTA00281313 • Aerosol Adhesives must comply with Green Seal Standard for Commercial Adhesives GS-36 requirements in effect on October t9, 2000. Aerosol Adhesives VOC weight (0t minus water) General purpose mist spray 65% VOCs by weight General purpose web spray 55% VOCs by weight Special purpose aerosol adhesives (all types) 70% VOCs by weight Potential Technologies & Strategies Specify low-VOC materials in construction documents. Ensure that VOC limits are clearly stated in each section of the specifications where adhesives and sealants are addressed. Common products to evaluate include: general construction adhesives, flooring adhesives, fire-stopping sealants, caulking, duct sealants, plumbing adhesives, and cove base adhesives. Review product cut sheets, material safety data (MSD) sheets, signed attestations or other official literature from the manufacturer clearly identifying the VOC contents or compliance with referenced standards. LEED 2009 FOR COMMERCIAL INTERIORS 47 EFTA00281314 IEQ Credit 4.2: Low-Emitting Materials—Paints and Coatings 1 point Intent 'lb reduce the quantity of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well-being of installers and occupants. Requirements Paints and coatings used on the interior of the building (i.e. inside the weatherproofing system and applied on-site) must comply with the following criteria as applicable to the project scope': ■ Architectural paints and coatings applied to interior walls and ceilings— must not exceed the volatile organic compound (VOC) content limits established in Green Seal Standard GS-1t, Paints, 1st Edition, May 2.0, t993. ■ Anti-corrosive and anti-rust paints applied to interior ferrous metal substrates must not exceed the VOC content limit of 260 established in Green Seal Standard GS-03, Anti-Corrosive Paints, and Edition,January 7,1997• • Clear wood finishes, floor coatings, stains, primers, and shellacs applied to interior elements: must not exceed the VOC content limits established in South Coast Air Quality Management District (SCAQMD) Rule 1113, Architectural Coatings, effective January 1,2004. Potential Technologies & Strategies Specify low-VOC paints and coatings in construction documents. Ensure that VOC limits are clearly stated in each section where paints and coatings are addressed. Track the VOC content of all interior paints and coatings during construction. The use of a VOC budget is permissible forcompliance with this credit. LEO) 2009 FOR COMMERCIAL INTERIORS 48 EFTA00281315 IEQ Credit 4.3: Low-Emitting Materials—Flooring Systems 1 point Intent 'lb reduce the quantity of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well-being of installers and occupants. Requirements OPTION 1 MI flooring must comply with the following as applicable to the project scope: • All carpet installed in the building interior must meet the testing and product requirements of the Carpet and Rug Institute Green Label Plus' program. • All carpet cushion installed in the building interior must meet the requirements of the Carpet and Rug Institute Green Label program. • All carpet adhesive must have less than so FIL VOC. • All hard surface flooring must be certified as compliant with the FloorScore standard (current as of the date of this rating system, or more stringent version) by an independent third- party. Flooring products covered by FloorScore include vinyl, linoleum, laminate flooring, wood flooring, ceramic flooring, rubber flooring and wall base. • An alternative compliance path using FloorScore is acceptable for credit achievement: 00% of the noncarpet finished flooring must be FloorScore-certified, and must constitute at least 2.5% of the finished floor area. Examples of unfinished flooring include floors in mechanical rooms, electrical rooms and elevator service rooms. • Concrete, wood, bamboo, and cork floor finishes such as sealer, stain and finish must meet the requirements of South Coast Air Quality Management District (SCAQMD) Rule st t3, Architectural Coatings, effective January 1, 2004. • Tile setting adhesives and grout must meet South Coast Air Quality Management District (SCAQMD) Rule n68. VOC limits correspond to an effective date ofJuly 1, 2005 and rule amendment date oflanuary 7,200s. The Green Label Plus program for carpets and its associated VOC emission criteria in micrograms per square meter per hour, alongwith information on testing method and sample collection developed by the Carpet and Rug Institute (CRl) in coordination with California's Sustainable Building Task Force and the California Department of Public Health, arc described inSection 9, Acceptable F.missions Testing for Carpet, DHS Standard Practice CAIDHSJEHLB/R-t74, dated oWtsroa. • FloorScore is a voluntary, independent certification plug' am that tests and certifies hard surface flooring and associated products for compliance with criteria adopted in California for indoor air emissions of Volatile Organic Compounds (VOCs) with potential health effects. The program uses a small-scale chamber test protocol and incorporates VOC emissions criteria, developed by theCalifornia Department of Public Health. LEED 2009 FOR COMMERCIAL INTERIORS 49 EFTA00281316 OR OPTION 2 MI flooring products must meet the testing and product requirements of the California Department of Public Health Standard Practice for the Testing of Volatile Organic Emissions from Various Sources Using Small-Scale Environmental Chambers, including 2O04 Addenda. Potential Technologies & Strategies Clearly specify requirements for product testing and/or certification in the construction documents. Select products that are either certified under the Green Label Plus program or for which testing has been done by qualified independent laboratories in accordance with the appropriate requirements. LEE) 2009 FOR COMMERCIAL INTERIORS 50 EFTA00281317 IEQ Credit 4.4: Low-Emitting Materials—Composite Wood and Agrifiber Products 1 point Intent 'lb reduce the quantity of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well-being of installers and occupants. Requirements Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing system) must contain no added urea-formaldehyde resins. Laminate adhesives used to fabricate on-site and shop-applied composite wood and agrifiber assemblies must not contain added urea-formaldehyde resins. Composite wood and agrifiber products are defined as: particleboard, medium density fiberboard (MDF), plywood, wheatboard, strawboard, panel substrates and door cores. Materials considered fixtures, furniture, and equipment (FM) are not considered base building elements and are not included. Products covered by IEQ Credit 4.5, Low-Emitting Materials, System Furniture and Seating are excluded from these requirements. Potential Technologies & Strategies Specify wood and agrifiber products that contain no added urea-formaldehyde resins. Specify laminating adhesives for field and shop applied assemblies, including adhesives and veneers that contain no urea-formaldehyde. Review product cut sheets, material safety data (MSD) sheets, signed attestations or other official literature from the manufacturer. LEED 2009 FOR COMMERCIAL INTERIORS 51 EFTA00281318 IEQ Credit 4.5: Low-Emitting Materials—Systems Furniture and Seating 1 point Intent 'lb reduce the quantity of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well-being of installers and occupants. Requirements MI systems furniture' and seating' that was manufactured, refurbished or refinished within s year priori to occupancy must meet s of the options below. OPTION 1 Furniture and seating are Greenguard Indoor Air Quality Certified. OR OPTION 2 Calculated indoor air concentrations that are less than or equal to those listed in Table s for furniture systems and seating determined by a procedure based on the EPA Environmental Technology Verification (ETV) Large Chamber Test Protocol for Measuring Emissions of VOCs and Aldehydes (September 1999) testing protocol conducted in an independent air quality testing laboratory. OR OPTION 3 Calculated indoor air concentrations that are less than or equal to those listed in Table s for furniture systems and seating determined by a procedure based on ANSI/BIFMA M7.1-2007and ANSI/EIFMA X7. t-2007 testing protocol conducted in an independent third-party air quality testing laboratory. The requirement in Section 5 ofANSI/SIFMA X7.1-zoo7 is waived for LEE!) purposes. Section 5 requires that laboratories used to perform the emissions testing and/or provide analytical results must be independently accredited to ISO/IEC 17025, "General requirements for the competence of testing and calibration laboratories." Table 1. Maximum Indoor Air Concentrations Chemical Contaminant I Emission Limits Systems Furniture Emission Limits Seating TV0C 0.5 mein 0.25 mg/m' Formaldehyde 50 parts per billion 25 parts per billion Total Aldehydes 100 pans per billion 50 parts per billion 4 - Phenylcyclohenne (4-PCH) 0.0065 mgirn. 0.00325 men) I Systems furniture is defined as either a panel.based workstation comprised of modular interconnecting panels. hang-on components and draweritiling components. or a freestanding grouping of furniture items and their components that have been designed to work in concert. Furnitureother than systems furniture and task and guest chairs used with systems furniture is defined as occasional furniture and is excluded from thecredit requirements. a Seating is defined as task and guest chairs used with systems furniture 3 Salvaged and used furniture that is more than 1-year-old at time of occupancy is excluded from the credit requirements. LEED 2009 FOR COMMERCIAL INTERIORS 52 EFTA00281319 Potential Technologies & Strategies Specify low-VOC materials in construction documents. Ensure that VOC limits are clearly stated in each section where furniture assemblies are addressed. LEED 2009 FOR COMMERCIAL INTERIORS 53 EFTA00281320 IEQ Credit 5: Indoor Chemical and Pollutant Source Control 1 point Intent lb minimize building occupant exposure to potentially hazardous particulates biological contaminants and chemical pollutants. that degrade air and water quality. Requirements Design to minimize and control the entry of pollutants into the tenant space and later cross-contamination of regularly occupied areas through the following strategies: ■ Employ permanent entryway systems at least 10 feet long in the primary direction of travel to capture din and particulates entering the building at all high-volume exterior entryways ■ Sufficiently exhaust each space where hazardous gases or chemicals may be present or used (e.g. garages, housekeeping and laundry areas copying and printing rooms) to create negative pressure with respect to adjacent spaces when the doors to the room are closed. For each of these spaces, provide self-closing doors and deck-to-deck partitions or a hard-lid ceiling. The exhaust rate must be at least 0.50 cubic feet per minute (cfin) per square foot, with no air recirculation. The pressure differential with the surrounding spaces must be at least 5 Pascals (Pa) (0.02 inches of water gauge) on average ands Pa (0.004 inches of water) at a minimum when the doors to the rooms are closed. ■ In mechanically ventilated buildings, install new air filtration media in regularly occupied areas prior to occupancy; these filters must provide a minimum efficiency reporting value (MERV) of 13 or better. Filtration should be applied to process both return and outside air that is delivered as supply air. ■ Provide containment drains plumbed for appropriate disposal of hazardous liquid wastes in spaces where water and chemical concentrate mixing occurs for maintenance or laboratory purposes. Potential Technologies & Strategies Design separate exhaust and plumbing systems for rooms with contaminants to achieve physical isolation from the rest of the building. Where appropriate, install permanent architectural entryway systems such as grills or grates to prevent occupant-borne contaminants from entering the space. LEED 2009 FOR COMMERCIAL INTERIORS 54 EFTA00281321 IEQ Credit 6.1: Controllability of Systems—Lighting 1 point Intent To provide a high level of lighting system control for individual occupants or groups in multi-occupant spaces (e.g., classrooms and conference areas) and promote their productivity, comfort and well-being. Requirements Provide individual lighting controls for: 90% (minimum) of the tenant space occupants to enable adjustments to suit individual task needs and preferences. Provide lighting system controls for all shared multi-occupant spaces to enable adjustments that meet group needs and preferences. Potential Technologies & Strategies Design the tenant space with occupant controls for lighting. Strategies to consider include lighting controls and task lighting. Integrate lighting systems controllability into the overall lighting design, providing ambient and task lighting while managing the overall energy use of the building. LEED 2009 FOR COMMERCIAL INTERIORS 55 EFTA00281322 IEQ Credit 6.2: Controllability of Systems—Thermal Comfort 1 point Intent To provide a high level of thermal comfort system control' for individual occupants or groups in multi-occupant spaces (e.g., classrooms and conference areas) and promote their productivity, comfort and well-being. Requirements Provide individual controls for 50% (minimum) of the tenant occupants to enable adjustment to suit individual needs and preferences, Operable windows may be used in lieu of individual controls for occupants located 20 feet inside and to feet to either side of the operable part of the window. The areas of operable window must meet the requirements of ASH RAE Standard 62.1-2007 paragraph 5.1 Natural Ventilation (with errata but without addenda'). Provide comfort system controls for all shared multi-occupant spaces to enable adjustments that meet group needs and preferences. Conditions for thermal comfort are described in ASHRAE Standard 55-2004 (with errata but without addenda) and include air temperature, radiant temperature, air speed and humidity. Potential Technologies & Strategies Design the building and systems with comfort controls to allow adjustments to suit individual needs or those of groups in shared spaces. ASHRAE Standard 55-2004 (with errata but without addenda identifies the factors of thermal comfort and a process for developing comfort criteria for building spaces that suit the needs of the occupants involved in their daily activities. Control strategies can be developed to expand on the comfort criteria and enable individuals to make adjustments to suit individual needs and preferences. These strategies may involve system designs incorporating operable windows, hybrid systems integrating operable windows and mechanical systems, or mechanical systems alone. Individual adjustments may involve individual thermostat controls, local diffusers at floor, desk or overhead levels, control of individual radiant panels, or other means integrated into the overall building, thermal comfort systems, and energy systems design. Designers should evaluate the closely tied interactions between thermal comfort as required by ASHRAE Standard 55-zoo4 (with errata but without addenda) and acceptable indoor air quality (as required by ASHRAE Standard 62..t-zoo? (with errata but without addenda) whether natural or mechanical ventilation. For the purposes of this credit comfort system control is defined ascontrol over at least r of these primary factors in the occupant's local environment: air temperature, radiant temperature. air speed and humidity. a Project teams uishing to use ASH RAE approved addenda for the purposes of this credit may do so at their discretion. Addenda must he applied consistently across all LEED credits. LEED 2009 FOR COMMERCIAL INTERIORS 56 EFTA00281323 IEQ Credit 7.1: Thermal Comfort—Design 1 point Intent 'lb provide a comfortable thermal environment that promotes occupant productivity and well-being. Requirements Design heating, ventilating and air-conditioning (HVAC) systems to meet the requirements of ASHRAE Standard 55- 2004, Thermal Comfort Conditions for Human Occupancy (with errata but without addenda'). Demonstrate design compliance in accordance with the Section 6.1.1 documentation. Potential Technologies & Strategies Establish comfort criteria according to ASH RAE Standard 55-2004 (with errata but without addenda) that support the desired quality and occupant satisfaction with building performance. Design building envelope (if in project scope) and systems with the capability to meet the comfort criteria under expected environmental and use conditions. Evaluate air temperature, radiant temperature, air speed, and relative humidity in an integrated fashion and coordinate these criteria with IEQ Prerequisite Minimum IAQ Performance, IEQ Credit I: Outdoor Air Delivery Monitoring, and IEQ Credit 2: Increased Ventilation. Project teams wishing to usc ASHRAE approved adcknda for the purposes of this credit maydo so at their discrction.Addenda must be applied consismntlyacross all LEED credits. LEED 2009 FOR COMMERCIAL INTERIORS 57 EFTA00281324 IEQ Credit 7.2: Thermal Comfort—Verification 1 point in addition to IEQ credit 7.1 Intent 'lb provide for the assessment of occupant thermal comfort over time. Requirements Achieve IEQ Credit 7.1: Thermal Comfort - Design Provide a permanent monitoring system and process for corrective action to ensure that building performance meets the desired comfort criteria as determined by IEQ Credit 7.1: Thermal Comfort—Design. Agree to conduct a thermal comfort survey of tenant space occupants within 6 to IS months after occupancy. This survey should collect anonymous responses about thermal comfort in the tenant space including an assessment of overall satisfaction with thermal performance and identification of thermal comfort problems. Agree to develop a plan for corrective action if the survey results indicate that more than 20% of occupants are dissatisfied with thermal comfort in the tenant space This plan should include measurement of relevant environmental variables in problem areas in accordance with ASHRAE Standard 55-zoci4 (with errata but without addenda'). Potential Technologies & Strategies ASHRAE Standard 55-zoo4 provides guidance for establishing thermal comfort criteria and documenting and validating building performance to the criteria. While the standard is not intended for purposes of continuous monitoring and maintenance of the thermal environment, the principles expressed in the standard provide a basis for the design of monitoring and corrective action systems. Project teams wishing to use ASHRAE approved adeknda for the purposes of this credit mays° do soar their discretion. Addenda must be applied consistently across all LEED credits. LEED 2009 FOR COMMERCIAL INTERIORS 58 EFTA00281325 IEQ Credit 8.1: Daylight and Views—Daylight 1-2 points Intent To provide occupants with a connection between indoor spaces and the outdoors through the introduction of daylight and views into the regularly occupied areas of the tenant space. Requirements Through 1 of the 4 options, achieve daylighting in at least the following spaces: Classroom Spaces Points 75% 1 90% 2 OPTION 1. Simulation Demonstrate through computer simulations that 75% (I point) or 90% (2 points) or more of all regularly occupied spaces areas achieve daylight illuminance levels of a minimum of 25 footcandle (fc) and a maximum of 500 fc in a clear sky condition on September 21 at 9.. and 3 Areas with illuminance levels below or above the range do not comply. However, designs that incorporate view-preserving automated shades for glare control may demonstrate compliance for only the minimum 25 fc illuminance level. OR OPTION 2. Prescriptive Use a combination of side-lighting and/or top-lighting to achieve a total daylighting zone that is at least 75% (t point) or 9O% (2 points) of all the regularly occupied spaces. For the Sidelighting Daylight Zone (see diagram below): ■ Achieve a value, calculated as the product of the visible light transmittance (V1T) and window-to-floor area ratio (WFR) of daylight zone, between 0.150 and 0.180. The window area included in the calculation must be at least 30 inches above the floor. 0.150 < VLT X WFR < 0.180 ■ The ceiling must not obstruct a line in section that: • Joins the window-head to a line on the floor that is parallel to the plane of the window; • Is twice the height of the window-head above the floor in distance from the plane of the glass as measured perpendicular to the plane of the glass, • Provide sunlight redirection and/or glare control devices to ensure daylight effectiveness. LEED 2009 FOR COMMERCIAL INTERIORS 59 EFTA00281326 tzott--- -• 2H For Top-lighting Daylight Zone (see diagram below): • The daylight zone under a skylight is the outline of the opening beneath the skylight, plus in each direction the lesser of: • 70%of the ceiling height OR • 1/2. the distance to the edge of the nearest skylight OR • The distance to any permanent opaque partition (if transparent show VLT) farther than 70% of the distance between the top of the partition and the ceiling. • Achieve a skylight roof coverage between 3% and 6% of the roof area with a minimum 0.5 VLT. • The distance between the skylights must not be more than 1.4 times the ceiling height • A skylight diffuser, if used, must have a measured haze value of grnter than 90% when tested according to ASTM Dt003. Avoid direct line of sight to the skylight diffuser. Exceptions for areas where tasks would be hindered by the use of daylight will be considered on their merits. LEED 2009 FOR COMMERCIAL INTERIORS 60 EFTA00281327 OR •-•, 351. Permanent Partition I Daylit Area OPTION 3. Measurement Demonstrate, through records of indoor light measurements that a minimum daylight illumination level of 25 fc has been achieved in at least 75% (t point) or 90% (2 points) of all regularly occupied areas. Measurements must be taken on a to-foot grid for all occupied spaces and recorded on building floor plans. Only the square footage associated with the portions of rooms or spaces meeting the minimum illumination requirements may be counted in the calculations. For all projects pursuing this option, provide daylight redirection and/or glare control devices to avoid high contrast situations that could impede visual tasks. Exceptions for areas where tasks would be hindered by daylight will be considered on their merits. OR OPTION 4. Combination Any of the above calculation methods may be combined to document the minimum daylight illumination in at least 75% (1 point) or 90% (a points) of all regularly occupied spaces. The different methods used in each space must be clearly recorded on all building plans. In all cases, only the square footage associated with the portions of rooms or spaces meeting the requirements maybe applied toward the 75% (t point) or go% (a points) of total area calculation required to qualify for this credit. In all cases, provide glare control devices to avoid high-contrast situations that could impede visual tasks. Exceptions for areas where tasks would be hindered by the use of daylight will be considered on their merits. LEED 2009 FOR COMMERCIAL INTERIORS 61 EFTA00281328 Potential Technologies & Strategies Design the tenant space to maximize interior daylighting. Strategies to consider include lower partition heights, interior shading devices, interior glazing and high ceiling reflectance values; additionally, automatic photocell-based controls can help reduce energy use. Predict daylight factors via manual calculations or model daylighting strategies with a physical or computer model to assess foot-candle levels and daylight factors achieved. LEO) 2009 FOR COMMERCIAL INTERIORS 62 EFTA00281329 IEQ Credit 8.2: Daylight and Views—Views for Seated Spaces 1 point Intent 'lb provide the building occupants a connection to the outdoors through the introduction of daylight and views into the regularly occupied areas of the tenant space. Requirements Achieve a direct line of sight to the outdoor environment via vision glazing between 30 inches and 90 inches above the finish floor for building occupants in 90% of all regularly occupied areas. Determine the area with a direct line of sight by totaling the regularly occupied square footage that meets the following criteria: ■ In plan view, the area is within sight lines drawn from perimeter vision glazing. ■ In section view, a direct sight line can be drawn from a point 42 inches above the floor (typical seated eye height) to perimeter vision glazing. The line of sight may be drawn through interior glazing. For private offices, the entire square footage of the office may be counted if 75% or more of the area has a direct line of sight to perimeter vision glazing. If less than 75% of the area has a direct line of sight, only the area with the direct line of sight count toward meeting the credit requirement. For multi-occupant spaces, the actual square footage with a direct line of sight to perimeter vision glazing is counted. Potential Technologies & Strategies Design the tenant space to maximize daylighting and view opportunities. Strategies to consider include lower partitions, interior shading devices, interior glazing and automatic photocell-based controls. LEED 2009 FOR COMMERCIAL INTERIORS 63 EFTA00281330 LEO) 2009 FOR COMMERCIAL INTERIORS 64 EFTA00281331 DREMEEDRI llH DESERI ID Credit 1: Innovation in Design 1-5 points Intent To provide design teams and projects the opportunity to achieve exceptional performance above the requirements set by the LEED Green Building Rating System and/or innovative performance in Green Building categories not specifically addressed by the LEED Green Building Rating System. Requirements Credit can be achieved through any combination of the Innovation in Design and Exemplary Performance paths as described below: PATH 1. Innovation in Design (1-5 points) Achieve significant, measurable environmental performance using a strategy not addressed in the LEED 2009 for Commercial Interiors Rating System. One point is awarded for each innovation achieved. No more than s points under I Dci may be earned through PATH —Innovation in Design. Identify the following in writing: ■ The intent of the proposed innovation credit • The proposed requirements for compliance • The proposed submittals to demonstrate compliance ■ The design approach (strategies) used to meet the requirements. PATH 2. Exemplary Performance (1-3 points) Achieve exemplary performance in an existing LEED 2009 for Commercial Interiors prerequisite or credit that allows exemplary performance as specified in the LEED Reference Guide for Green Building Interior Design, 2009 Edition. An exemplary performance point may be earned for achieving double the credit requirements and/ or achieving the next incremental percentage threshold of an existing credit in LEED. One point is awarded for each exemplary performance achieved. No more than 3 points under IDct may be earned through PATH 2— Exemplary Performance. Potential Technologies & Strategies Substantially exceed a LEED 2009 for Commercial Interiors performance credit such as energy performance or water efficiency. Apply strategies or measures that demonstrate a comprehensive approach and quantifiable environment and/or health benefits. LEED 2009 FOR COMMERCIAL INTERIORS 65 EFTA00281332 ID Credit 2: LEED Accredited Professional 1 Point Intent To support and encourage the design integration required by LEED to streamline the application and certification process. Requirements At least t principal participant of the project team shall be a LEED Accredited Professional (AP). Potential Technologies & Strategies Educate the project team members about green building design and construction, the LEED requirements and application process early in the life of the project. Consider assigning integrated design and construction process facilitation to the LEED AP. LEO) 2009 FOR COMMERCIAL INTERIORS 66 EFTA00281333 MCDOME HERM' RP Credit 1: Regional Priority 1-4 Points Intent To provide an incentive for the achievement of credits that address geographically specific environmental priorities. Requirements Earn1-4 of the 6 Regional Priority credits identified by the USGBC regional councils and chapters as having environmental importance for a project's region. A database of Regional Priority Credits and their geographic applicability is available on the USGBC website, http:/Jwww.usgbc.orgj. One point is awarded for each Regional Priority Credit achieved; no more than 4 credits identified as Regional Priority credits may be earned. Projects outside of the U.S. are not eligible. Potential Technologies & Strategies Determine and pursue the prioritized credits for the project location. LEED 2009 FOR COMMERCIAL INTERIORS 67 EFTA00281334 LEO) 2009 FOR COMMERCIAL INTERIORS 68 EFTA00281335